PREPARATION

NAME OF EACH PART OF PROJECTOR

FRONTSPEAKERSINFRAREDREMOTE RECEIVERPROJECTION LENSLENS COVER

CAUTION

Do not turn on a projector with lens cover attached. High temperature from light beam may damage lens cover and result in fire hazard.

CARRYING HANDLEEXHAUST VENTADJUSTABLE FEET
BACK

EXHAUST VENT

HOT AIR EXHAUSTED !

Air blown from exhaust vent is hot. When using or installing a projector, following precautions should be taken.

●Do not put a flammable object near this vent.

●Keep rear grills at least 3’ (1m) away from any object, especially heat-sensitive object.

●Do not touch this area, especially screws and metallic parts. This area will become hot while a projector is used.

This projector detects internal temperature and automatically controls operating power of Cooling Fans.

INFRARED

REMOTE RECEIVER

LAMPCOVERMAIN ON / OFFSWITCH
AIR INTAKEVENT

EXHAUST VENT

POWER CORDCONNECTOR
BOTTOMAIR INTAKE VENTS

This projector is equipped with cooling fans for protection from overheating. Pay attention to following to ensure proper ventilation and avoid a possible risk of fire and malfunction.

● Do not cover vent slots.

●Keep bottom clear of any objects.

Obstructions may block cooling air.

AIR INTAKE VENT

7