Sanyo PLC-ET30L Connecting to a Computer Digital and Analog RGB, Cables used for connection

Installation

Connecting to a Computer (Digital and Analog RGB)

Cables used for connection

• VGA Cable (HDB 15 pin)*	• USB Cable
• DVI-Digital Cable	• Audio Cables (Mini Plug [stereo] x 2)
• BNC Cable

(*One cable is supplied; other cables are not supplied with the projector.)

Monitor		Audio	Monitor Output	Monitor		Monitor	USB port	External Audio Equipment
Input		Output		Output		Output
								Audio Input
VGA	Audio		BNC	VGA	DVI-Digital		USB
	cable
cable			cable	cable	cable		cable
	(stereo)

ANALOG	AUDIO	G B R H/V V	ANALOG	DIGITAL	USB
OUT	IN		IN	(DVI-D)
					Audio cable
					(stereo)

	AUDIO OUT
✔Note:	(stereo)

•When the AUDIO OUT is plugged-in, the projector’s built- in speaker is not available.

•USB cable connection is needed when operating the computer with the remote control.

Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables.

20