Setting

Setting

1

Press the MENU button and the On-Screen Menu will appear.

 

Press the Point Left/Right button to move the red frame pointer

 

to the Setting Menu icon.

2

Press the Point Down button to move the red frame pointer to

the item that you want to set and then press the SELECT button. The Setting dialog box appears.

Language

The language used in the On-Screen Menu is available in English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Russian, Chinese, Korean, or Japanese.

Keystone

This function corrects distortion of a projected image. Select either Store or Reset with the Point Left/Right button, and then press the Select button. The keystone dialog box appears. Adjust keystone with the Point Up/Down/Left/Right button.

Store ···· stores the keystone adjustment even if the AC power cord is disconnected.

Reset ····resets the keystone adjustment when the AC power cord is disconnected.

Blue back

When this function is “On,” the projector produces a blue image while input signal is not detected.

Display

This function decides whether to display On-Screen Displays. On ···· shows all the On-Screen Displays.

Off ···· does not show On-Screen Displays except;

●On-Screen Menu

●“Power off?” message

●P-Timer

●“No signal” message

●”Wait a moment!” message

Logo

This function decides what to be displayed when starting up.

User

···· the image you captured

Default

···· the factory-set logo

Off

···· count-down only

Capture

This function is used to capture the image being projected and use it for a starting-up display or interval of presentations. After capturing the projected image, go to the Logo function (above) and set it as “User”. Then the captured image will be displayed when turning on the projector next time or pressing the NO SHOW button. (p21)

To capture the image, select [Yes]. To cancel the Capture function, select [No].

Before captureing an image, select Standard in the Image Select Menu to capture a proper image. (See page 29, 35.)

A signal from a computer can be captured up to XGA(1024 x 768). A signal from video equipment can be captured except for 720p, 1035i, and 1080i. When capturing the image that has been adjusted by the Keystone function, the adjustment data is automatically reset and the projector captures an image without keystone adjustment.

Setting Menu (Language)

Set the red frame

Setting Menu icon

pointer to the item

 

and press the

 

SELECT button.

 

When pressing the SELECT button at Language, the Language Menu appears.

Capture

Select [Yes] to capture the projected image.

Select [Yes] to stop capturing.

38