VIDEO MODE

PICTURE IMAGE ADJUSTMENT

ADJUSTING THE PICTURE IMAGE

1

Press the MENU button and the ON-SCREEN MENU will

 

appear. Press the POINT LEFT/RIGHT buttons to select IMAGE

 

and press the SELECT button. Another dialog box

 

PICTURE IMAGE ADJUSTMENT Menu will appear.

2

Press the POINT DOWN button and a red-arrow icon will

appear. Move the arrow to the item that you want to adjust by

pressing the POINT UP/DOWN buttons. To change the value, press either the POINT RIGHT button or the POINT LEFT button.

Color

Press POINT LEFT button to lighten the image, and press POINT RIGHT button to deepen the image. (From 0 to 63.)

Tint

Press POINT LEFT button to increase purple, and press POINT RIGHT button to increase green. (From 0 to 63.)

White balance (Red / Green / Blue)

Move the arrow to the color that you want to adjust. Press POINT LEFT button to lighten the color, and press POINT RIGHT button to deepen the color. (From 0 to 63.)

Contrast

Press POINT LEFT button to decrease contrast, and press POINT RIGHT button to increase contrast. (From 0 to 63.)

Brightness

Press POINT LEFT button to darken the image, and press POINT RIGHT button to brighten the image. (From 0 to 63.)

Sharpness

Press POINT LEFT button to soften the image, and press POINT RIGHT button to sharpen the image. (From 0 to 15.)

Gamma

Press either POINT LEFT button or POINT RIGHT button to obtain better balance of contrast. (From 0 to 16.)

Each of the keys operates as follow.

Reset Recalls the data previously adjusted.

Stored Stores the data in the memory.

Quit

Closes the PICTURE IMAGE ADJUSTMENT Menu.

 

Move the arrow to the item

Closes the PICTURE

and press POINT RIGHT /

IMAGE ADJUSTMENT

LEFT button.

Menu.

 

NORMAL FUNCTION

The normal picture level is preset on this projector at the factory and can be restored anytime you press the NORMAL button (located on the Top Control or on the Remote Control Unit). The "Normal" display will be displayed on the screen for a few seconds.

Normal

31