PREPARATION

NAME OF EACH PART OF PROJECTOR

FRONT OF CABINETSPEAKERSINFRAREDREMOTE RECEIVERPROJECTION LENSLENS COVERCAUTION

Do not turn on a projector with lens cover attached. High temperature from light beam may damage lens cover and result in fire hazard.

POWER CORDCONNECTORMAIN ON / OFFSWITCHCARRYING HANDLELEVEL AND TILT ADJUST HANDLE
BACK OF CABINETEXHAUST VENT HOT AIR EXHAUSTED !

Air blown from exhaust vent is hot. When using or installing a projector, following precautions should be taken.

●Do not put a flammable object near this vent.

●Keep rear grills at least 3’ (1m) away from any object, especially heat-sensitive object.

●Do not touch this area, especially screws and metallic parts. This area will become hot while a projector is used.

This projector detects internal temperature and automatically controls operating power of Cooling Fans.

INFRARED

REMOTE RECEIVER

LAMP COVER
BOTTOM OF CABINET

 

AIR FILTER
AIR INTAKE VENTS

 

This projector is equipped with cooling

 

fans for protection from overheating.

 

Pay attention to following to ensure

ADJUSTABLE FEET

proper ventilation and avoid a possible

 

risk of fire and malfunction.

 

● Do not cover vent slots.

 

● Keep bottom clear of any objects.

 

Obstructions may block cooling air.

 

ADJUSTABLE FEET

7