CONNECTING THE PROJECTOR
CONNECTING TO THE MONITOR OUTPUT TERMINAL (ANALOG HDB
This terminal output the information of the selected computer source being viewed on the screen (Computer 1 or Computer 2). When video source ("Video 1" or "Video 2") is selected, this terminal outputs Computer 1 input information.
An external monitor can be connected to the
●Connect the monitor to this terminal using the VGA cable (not provided).
HDB
5 | 4 | 3 | 2 | 1 |
10 | 9 | 8 | 7 | 6 |
15 14 13 12 11
Pin No./Signal | Pin No./Signal | ||
1 | Red input | 9 | Non Connect |
2 | Green input | 10 | Ground (Vert. sync.) |
3 | Blue input | 11 | Sense 0 |
4 | Sense 2 | 12 | Sense 1 |
5 | Ground (Horiz.sync.) | 13 | Horiz. sync |
6 | Ground (Red) | 14 | Vert. sync |
7 | Ground (Green) | 15 | Reserved |
8 | Ground (Blue) |
|
|
CONNECTING TO THE AUDIO MONITOR OUTPUT (VARIABLE) JACKS
These jacks will contain the audio information of the selected program source being viewed on the screen (Computer 1, Computer 2, Video 1 or Video 2). If you have selected program source Computer 2 the audio signal connected to the Computer 2 audio input jack will be available at the audio monitor output jacks.
Use RCA type audio for connection.
●If the audio input of the audio equipment is stereo, be sure to connect the right and left channels to the respective right and left jacks.
●If the audio input of the audio equipment is monaural, connect it to the left jack.
CONNECTING TO THE SERIAL PORT (DB
●If you control the projector by computer, you must connect a cable (not provided) from your computer to this terminal.
1 | |
2 | R x D |
3 | T x D |
4 | |
5 | Ground |
6 | |
7 | |
8 | |
9 |
CONNECTING TO THE USB PORT CONNECTORS (1 and 2)
This Projector is designed for connecting with USB Port of the computer or peripheral equipment that is to be standard.
1 Vcc
2 - Data
3 + Data
4 Ground
13