| RESET BUTTON | R/C JACK |
This projector uses a micro processor to control the unit. Occasionally, the micro processor may malfunction and need to be reset. This can be done by pressing the RESET button with a pen, which will shut down and restart the unit. Do not use the RESET function excessively.
When using the Wired / Wireless Remote Control Unit as the Wired Remote Control, Connect the Wired Remote Control Unit to this jack with the Remote Control Cable (supplied). (Refer to page 17.)
|
|
|
| MONITOR OUT |
|
| |
R | G | B | H | V | RESET | R/C JACK | |
|
|
|
|
|
| ||
These jacks output the signal from the COMPUTER INPUT terminals (except the digital input signal). Connect an external monitor to these jacks. (Refer to P14.)
| AUDIO OUTPUT JACKS |
| VIDEO MONITOR OUTPUT JACK |
|
Connect an external audio |
| This terminal outputs the composite video | |
amplifier to these jacks. |
| signal or the signal from the | |
(Refer to P13, 14.) |
| INPUT JACK. Connect an external | |
|
| monitor to this jack. (Refer to P13.) | |
12