APPENDIX

INDICATORS AND PROJECTOR CONDITION

Check the Indicators for projector condition.

 

Indicators

 

 

Projector Condition

LAMP

WARNING

READY

LAMP

 

REPLACE

TEMP.

 

 

green

red

 

 

yellow

red

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The projector is OFF. (The AC Power Cord is unplugged.)

 

 

 

 

 

 

 

 

 

 

The projector is READY to be turned on with the POWER ON-

 

 

 

 

OFF button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The projector is operating normally.

The Warning Temp. Indicator flashes red to let you know the internal temperature of the projector exceeds the normal level. If the temperature goes up further, the projector will be turned off automatically and the Ready indicator will go out. When the pro-

jector is cooled down enough and the temperature returns to nor- mal, the READY indicator lights green and the projector can be turned on. (The WARNING TEMP. indicator keeps flashing.) Check and clean the Air Filter.

 

The projector is cooled down enough and the temperature

returns to normal. When turning on the projector, the WARNING

 

TEMP. indicator stops flashing. Check and clean the Air Filter.

 

 

The projector is being cooled down. It cannot be turned on until

the READY indicator lights green.

 

The projector detects an abnormal condition and cannot be turned on. Unplug the AC Power Cord and plug it again to turn on the projector. If the projector is turned off again, disconnect

the AC Power Cord and contact the dealer or the service center for service and checkup. Do not leave the projector on. It may cause electric shock or a fire hazard.

 

 

The projector is in the Power management mode.

• • • on

• • • flashing

• • • dim

• • • off

When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the Lamp Replace Counter after replacement of the lamp.

48