Setting

Keystone

Keystone

This function is used to store or reset the keystone

 

correction when the AC power cord is unplugged. Use the

 

Point 78 buttons to switch between each option.

 

Store ........ Keep the keystone correction even when the

 

AC power cord is unplugged.

 

Reset ....... Release the keystone correction when the AC

 

power cord is unplugged.

 

To correct keystone distortion, press the SELECT button. The “Keystone” appears on the screen. Use the Point ed buttons to correct keystone distortion (p.26).

Blue back

When this function is “On,” a blue image is displayed while the input signal is not detected.

Display

This function decides whether to display On-Screen Displays.

On ............................

Show all the On-Screen displays. Use

 

this function when you want to

 

project images after the lamp

 

becomes bright enough. The factory

 

default setting is in this option.

Countdown Off ........

Show the input image instead of the

 

countdown when turning on the

 

projector. Use this function when you

 

want to project the image as early as

 

possible even when the lamp is not

 

bright enough.

Off ............................

Hide the On-Screen Displays except;

 

●On-Screen Menu

 

●“Power off?” (p.23)

 

●“No signal” for Power management

 

(p.52)

 

●“Please wait ...”

 

●White arrows for the True function

 

in the Screen Menu (p.38)

Use the Point 78 buttons to switch between the options.

48