Sanyo PLC-XW200 specifications High Cost Performance with Easy Setup Function, Other Features

Ultra Portable Multimedia Projector PLC-XW250/XW200

High Cost Performance with Easy Setup Function

Easy Setup Function

PLC-XW250 / XW200 provides "Auto Setup Function" that corrects vertical shape distortion by searching for an input signal and detecting projector

incline, reducing setup time. Furthermore, the "Screen Guidance Function" allows projector set up according to the displayed guidance. This function provides all an easy guide to projection.

Wired LAN(RJ-45) for projector control

This model is equipped with Wired LAN(RJ-45) that allows you to manage and control projector via Network. It is possible to check the operating time of lamp and manage the warning notification by Email. Power ON/OFF and switching of input sigal can be controled. You can save a lot of time with manage and control.

Enviroment friendly power consumption in standby mode: 0.4w

We’ve reduced the power consumption in standby mode to 0.4w. Caring for the enviroment is required due to global warming and CO2 reduction. The standby power consumption is reduced by 84% compared to previous model.

PLC-XW250 2600 lumens

PLC-XW200 2200 lumens

Other Features

•D-sub 15pin for Input, D-sub 15pin for Input or Monitor out

•Direct power off (AC plug out before turned-off)

•18 languages (Operation menu) … New: Thai, Turkish

•Colorboard (4 color) mode, Security:PIN code lock, Key lock

Specifications

Model name	PLC-XW200, XW250 series
Panel	0.55 inch TFT p-Si x 3
No. of pixels	2,359,296 (1024 x 768 dots)
Projection lamp	220W UHP
Brightness(Lamp mode : “High” &	XW250 : 2,600 lm
Image mode: “Dynamic”)	XW200 : 2,200 lm
Contrast	500:1 (Lamp mode : “High” & Image mode: “Dynamic”)
Uniformity	85% (corner to center)
Projection lens	F2.0-2.15, f = 18.38 - 22.06 mm / 0.72” - 0.87”
Screen size	40” - 300 ”, 1.3m - 11.8m / 4.3’ - 38.7’, U:D = 6:1
Zoom / Focus	100” at 3.3m - 3.9m, 10.8‘ - 12.8’, 1 : 1.2 Manual driven
HDTV signals	480i, 480p, 575i, 575p, 720p, 1035i and 1080i
Color systems	PAL / SECAM / NTSC / NTSC4.43 / PAL-M/N
Video Signal	Composite, S-Video, Component
	D-sub15 x 1 : Analog RGB Input
Computer Terminal	(Component and S-video input with conversion cable)
	D-sub15 x 1 : Analog RGB Input or Monitor out
Video Terminal	RCA x 1 : Composite video
Computer compatibility	(UXGA/WXGA)/SXGA/XGA/SVGA/VGA/MAC
Audio	Mini-Jack (stereo) x 1	: Input (for Computer & Video)
	Mini-Jack (stereo) x 1	: Output (variable audio out)
Communication Terminal	RJ-45 (LAN) D-sub 9pin (RS 232C)
Presentation Tool	Freeze / Digital Zoom / No Show / etc
Other Feature	Progressive, 3-2 & 2-2 pull down, User Logo
Scanning frequency	H/V sync 15 - 100kHz, 50 - 100Hz, Dot clock 140 MHz
Sound output	1.0 W Mono
Fan Noise	29dBA (Lamp mode “Eco”)
Voltage	100V-120V AC, 200V-240V AC
Power consumption	XW250 : 212W / 296W (Lamp mode: Eco / High)
	XW200 : 212W / 272W (Lamp mode: Eco / High)
Standby power consumption	0.4W / 4.3W (Standby mode: Eco/ Network)
Dimensions (W x H x D)	13.1” x 3.4 “ x 9.7” (not including protruding parts)
Weight	5.5 lbs.

*Replacement Lamp Type No.: 610 345 2456

*1 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.

*2 For analog signal only, limitations on certain output signals. Does not support all types of input signals.

*Specifications as of May 26, 2009, subject to change.

*All product names and company names are trademarks or registered trademarks of their respective companies.

SANYO Presentation Technologies

Toll free: 888-337-1215 www.sanyoprojectors.com

© 2009 SANYO North America Corporation.