Sanyo PLV-HD10 CONNECTING TO VIDEO EQUIPMENT, a Projector, Terminals of, Cables used for connection

CONNECTING PROJECTOR

CONNECTING TO VIDEO EQUIPMENT

Cables used for connection

•Video Cable (BNC)✽

•Audio Cable (RCA x 2) ✽

•Scart Cable ✽

•DVI-VGA Adapter ✽

(✽ = Cables are not supplied with this projector.)

NOTE :

When connecting cable, power cords of both a projector and external equipment should be disconnected from AC outlet. Turn a projector and peripheral equipment on before computer is switched on.

Video Source (example)	Video Equipment with	Component video output equipment.
Video Equipment with
		(such as DVD player or
	SDI signal output/input
Digital video signal output		high-definition TV source.)

SDI Output SDI Input	Component Video Output	RGB Scart	Audio Output
Digital Video Output	Pr/Cr Y Pb/Cb	21-pin Output		R L

		BNC Cable ✽				DVI-VGA			Audio Cable
BNC Cable ✽						Adapter ✽		Scart
									(Stereo) ✽
								Cable ✽
DVI	SDI IN 1/SDI IN 2	SDI OUTPUT		Pr/Cr-Y-Pb/Cb				AV AUDIO IN
							DVI
SERIAL PORT IN		SDI IN1	SDI IN2	SDI OUT				INPUT 1
SERIAL PORT OUT		R/Pr	G/Y	B/Pb H/HV	V		AUDIO	CONTROL PORT
						R	L	2
								INPUT
							(MONO)
R/C JACK	USB						AUDIO	CONTROL PORT
								3
						R	L	INPUT
							(MONO)
AUDIO OUT									Terminals of
R	RESET
	L							4
	(MONO)							INPUT	a Projector
	AUDIO OUT
	Audio Cable			External Audio Equipment
	(Stereo) ✽				Audio Amplifier			Audio Speaker (stereo)

Audio Input

15