OPERATION

OPERATION

When the Projector is turned on, the POWER indicator lights in green.

*When the POWER indicator does not light and the WARNING FILTER indicator flashes, the filter is not attached to the Smoke Resistant Box. In this case, the READY indicator on the Projector does not light and the Projector can not be turned on.

ORANGE

GREEN RED

INDICATORS

INDICATORS OPERATION

WARNING FILTER . . . . Normally this does not light. Should the filter become clogged with dust particles indicator flashes orenge. When the filter needs to be replaced, indicator lights in orange. The filter should then be replaced immediately. When the filter is not attached, the indicator will flash.

WARNING . . . . . . . . . . Normally this does not light. When the box's fan is operating abnormally, indicator flashes red. When this occurs, turn off power immediately and request a maintenance check. Do not leave the Smoke Resistant Box operational while the indicator is flashing as it may become a fire and/or accident hazard.

INITIAL SET-UP BEFORE USE

When the Smoke Resistant Box is used for the first time, the initial set-up should be performed in the following procedures. The Smoke Resistant Box cannot be operated or handled properly without this initial set-up.

1 First, properly attach the Smoke Resistant Box to the Projector.

2 Turn on the Projector and display some images. Check that each indicator on the Smoke Resistant Box lights normally.

Go to next page

ON OFF OFF

 

7