1. Installing the Option Board

Remove the dome cover and then the lens assembly. Place the dome cover back once you have finished the settings.

• Please refer to the Installation Manual supplied with the camera.

CN407

COM/NET

 

Lens assembly

 

 

 

Drop-prevention cord

 

1

4Fixer (blue)

 

 

Spacer

 

 

2

2

 

 

Spacer

 

3Screw

LAN port

LAN cable 5

 

 

 

Note: Confirm that the COM switch on the lens assembly is turned to “N”.

1

2

3

4

5

Connect the option board pin connector to the COM/NET terminal located at the reverse side of the lens assembly.

Fit the spacers on the option board into the lens assembly (2 places).

Fix the option board from the reverse side using the screws supplied with the option board

(3 places).

Remove the drop-prevention cord and secure it together with the supplied fixer (blue) using a screw.

Draw the LAN cable through the hole at the bottom of the camera unit.
6Set the lens assembly back to the camera unit.

2