INSTRUCTION MANUAL

Outdoor Housing
This installation should be made by a qualified service

VA-80EX

person and should conform to all local codes.
About this manualThis housing is designed for outdoor installation.

Before installing and using this unit, please read this manual carefully. Be sure to keep it handy for later reference.

Example of

Example of

wall mounting

pendant mounting

AccessoriesHexagonal wrenchScrews, washers(for power board unit)Waterproof tape

Features and specifications are subject to change without prior notice or obligations.

CAUTION:

Install this housing securely according to this installation manual. Be aware that allowing the bracket to fall with the camera on it may cause personal injury.

Important

•Be careful when opening holes for installing the unit. Work with the power and video cables pulled out for easy installation.

•Make sure to properly perform waterproofing for the ceiling or wall where you are installing the unit.

•Make sure that the surface in the installation location has no unevenness and is strong enough to bear the total weight of the unit.

bSpecificationsColor: BeigeMaterial: MetalWaterproof Standard: Conforming to IP66Operating Environment(with power source connected) :

Temperature; -30°C - +50°C (-22°F - +122°F) Humidity; less than 90% RH (no condensation)

Weight: Approx. 2.5 kg (5.5 lb)Dimensions:

6 (0.2)

182 (7.2)

248 (9.8)

Unit: mm (inch)bSpecifications of Heater (built into VA-CM8C/CM8S)Automatic switch ON/OFF temperature:ON; Approx. 5°C (41°F) OFF; Approx. 15°C (59°F)Power supply: 24 V AC ± 10%, 50/60HzPower consumption: Max. 35 W (When heater turned on)
日本語 中文简体 Deutsch Español Français English