![](/images/new-backgrounds/1312559/3125593x1.webp)
CONNECTIONS, SETTINGS
Connections |
|
|
Monitor |
|
|
1 | VIDEO OUT | VS IN |
| POWER |
|
24 V AC connection | 12 V DC connection | ||
Figure A | GND | AC24VGND | |
AC24V | |||
| 3 |
| 3 |
DC12V | 2 | DC12V | 2 |
|
| ||
Figure 1 |
| Figure 2 |
|
CCamera adjustment/Settings
The camera comes
If you have trouble adjusting the camera, contact your place of purchase or a Sanyo Authorized Service Center.
• The settings shown for switches | and are the settings at |
Lens switching
Set this as appropriate for the type of lens you are using.
EI | Electronic iris lens |
VIDEO | Video |
DC ★ | |
| powered by DC power only) |
|
|
CAUTION
When using a video
Camera installation | Camera adjustment/Settings | |||
Camera screws (Shorter) |
|
|
|
|
| BLC LL |
|
|
|
|
|
|
| VIDEO |
| ON | L | H EI | DC |
| OFF |
|
|
|
Digital video recorder |
| PHASE LEVEL |
| |
|
|
|
| |
or |
|
|
|
|
: VIDEO IN | 1 2 | 3 | 4 | 5 |
: VIDEO OUT |
|
|
|
|
Bracket screws (Longer)
time of factory shipment. |
• Use a |
(★ = Factory default setting) |
Backlight compensation (BLC)
For adjusting backlight compensation. Use this setting to adjust the backlight compensation when an image is backlit.
ON | Backlight compensation |
OFF ★ | No backlight compensation is applied. |
|
|
Sync setting (LL)
•Turn the ALC (light control) dial on the lens barrel fully to AV (average).
•If the backlight compensation is not correct, adjust the LEVEL dial on the lens barrel.
●
Flange back is the distance between the lens and the camera (CCD). Follow the steps below to adjust the flange back distance, since the image can become out of focus when you are
1 | Loosen the LOCK screw | 3 |
| with a | |
|
|
AConnections
●What you will need
•Peripheral equipment (such as monitor, digital video recorder or
•Cables for connecting peripheral equipment and camera (coaxial cables, connecting plugs)
•Power adapter (24 V AC or 12 V DC)
•Attachable lens
●Making connections
1Connect the camera and peripheral equipment with cables.
2Connect the power cable.
Secure the supplied clamping core to the power cable as shown in Figure A.
<When using a 24 V AC adapter>
Connect 3 wire grounded cable# (use 18AWG+) to the ground (GND) terminal as shown in Figure 1.
<When using a 12 V DC adapter> Connect the cable as shown in Figure 2.
Vertical sync disturbance may occur when a selector is used to switch between multiple cameras connected to one monitor. To prevent vertical sync disturbance, set to “ON.”
ON | |
| • Adjust PHASE dial to eliminate sync disturbance. |
OFF ★ | Internal Sync |
|
|
•Line-Lock: Synchronizes the unit with power frequency.
CAUTION
If the image disturbance doesn’t disappear after adjusting the PHASE dial ( ) on the second and subsequent cameras, adjust the PHASE dial ( ) on the first camera. If the problem persists, check that all the devices have
screwdriver.
2
lens, and adjust the focus | 2 |
with the focus ring on the | 1 |
lens. | LOCK |
3 Set the zoom lens to wide | 4 |
angle, and adjust the focus
with the
4Repeat steps 2 and 3 to check that the focus is not lost when switching between
●Coaxial cables supported
You can use any of the following coaxial cables:
•
•
•
CAUTION
•When using an
•Select the cable to use according to the distance between the devices to connect.
•If you use a cable other than the types above, the image or sync signal will be attenuated and will not be transmitted correctly.
●Attaching a lens
The
CAUTION
•When connecting the power cable to the camera, check that the polarity is correct.
•To prevent fire hazard any UL listed wire rated
3Insert the power adapter plug into the wall outlet. The “POWER” indicator (red) lights.
BCamera installation
●Camera attachment bracket
As shown in Figure B above, you can remove the camera attachment bracket and reattach it to the camera bottom if you want to attach the camera to the top of an object. If you remove
been connected with the correct power cable polarity.
Line phase (PHASE)
When sync setting ( ) is ON, use a
Lens iris (LEVEL)
When using a
L (Low) | Closes the lens iris, making the entire image darker. |
H (High) | Opens the lens iris, making the entire image brighter. |
|
|
recommended.
1 Remove the lens cap.
2 Attach the lens.
1
the camera attachment bracket, be sure to use the removed screws when reattaching it (other screws may not fit).
SANYO INDUSTRIAL VIDEO | EXCLUSIONS | |
This warranty does not cover (A) the adjustment of | ||
B/W VIDEO CAMERA LIMITED WARRANTY | ||
instruction manual, or (B) the repair of any product whose serial number has been altered, defaced or removed. | ||
| This warranty shall not apply to the cabinet or cosmetic parts, batteries or routine maintenance. | |
OBLIGATIONS | ||
This warranty does not apply to uncrating, setup, installation, removal of the product for repair or reinstallation of the | ||
| product after repair. |
Turn the lens slowly to attach it to the camera.
3 Connect the lens plug to the LENS terminal.
3
2
CAUTION
•Depending on the type of lens, the shape of the lens plug may differ. In this case, contact the place of purchase or a Sanyo Authorized Service Center.
•When attaching the lens, use a lens with a mount screw
(L) that is less than 7 mm in length. If a lens that exceeds
this size is used, the camera may be damaged and you |
| |
may not be able to attach it correctly. |
| |
• When attaching a C mount lens, attach the lens to the | L | |
camera after inserting the C mount ring (sold separately). | ||
|
CAUTION
When using the camera attachment stand (sold separately), select a location that will be able to withstand the weight of the camera and stand for many years, and fix them securely in place.
In order to obtain warranty service, the product must be delivered to and picked up from an Authorized Sanyo Service | This warranty does not apply to repairs or replacements necessitated by any cause beyond the control of SFC including, | ||||||||||||
Center at the user's expense, unless specifically stated otherwise in this warranty. The names and addresses of | |||||||||||||
but not limited to, any malfunction, defect or failure caused by or resulting from unauthorized service or parts, improper | |||||||||||||
Authorized Sanyo Service Centers may be obtained by calling the | |||||||||||||
maintenance, operation contrary to furnished instructions, shipping or transit accidents, modification or repair by the user, | |||||||||||||
|
|
|
|
|
| ||||||||
For product operation, authorized service center referral, service assistance or problem resolution, call | abuse, misuse, neglect, accident, incorrect power line voltage, fire, flood or other Acts of God, or normal wear and tear. | ||||||||||||
The foregoing is in lieu of all other expressed warranties and SFC does not assume or authorize any party to assume for | |||||||||||||
| CUSTOMER INFORMATION | ||||||||||||
| it any other obligation or liability. |
|
|
|
| ||||||||
| Weekdays 8:30 AM - 5:00 PM Pacific Time |
|
|
|
| ||||||||
| SFC DISCLAIMS ALL OTHER WARRANTIES EXPRESS OR IMPLIED, WITH REGARD TO THIS PRODUCT | ||||||||||||
For accessories and/or parts, call |
|
|
| (INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS). IN NO EVENT SHALL SFC BE LIABLE | |||||||||
| PARTS ORDER INFORMATION | FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM THE OWNERSHIP OR USE OF | |||||||||||
| Weekdays 8:30 AM - 5:00 PM Pacific Time | THIS PRODUCT OR FOR ANY DELAY IN THE PERFORMANCE OF ITS OBLIGATIONS UNDER THIS WARRANTY | |||||||||||
|
|
|
|
|
| DUE TO CAUSES BEYOND ITS CONTROL. SFC'S LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES | |||||||
THIS WARRANTY IS VALID ONLY ON SANYO PRODUCTS PURCHASED OR RENTED IN THE UNITED STATES | RESULTING FROM ANY CAUSE WHATSOEVER, ARISING OUT OF OR IN CONNECTION WITH THE SALE, USE OR | ||||||||||||
OWNERSHIP OF THIS PRODUCT INCLUDING WARRANTOR'S NEGLIGENCE, ALLEGED DAMAGED OR | |||||||||||||
OF AMERICA, EXCLUDING ALL U.S. TERRITORIES AND PROTECTORATES. THIS WARRANTY APPLIES ONLY | |||||||||||||
DEFECTIIVE GOODS, WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT, SHALL IN NO EVENT | |||||||||||||
TO THE ORIGINAL RETAIL PURCHASER OR | |||||||||||||
EXCEED THE PURCHASE PRICE OF THE PRODUCT. | |||||||||||||
RENTAL AGREEMENT MUST BE SUBMITTED TO THE AUTHORIZED SANYO SERVICE CENTER AT THE TIME | |||||||||||||
|
|
| ATTENTION | ||||||||||
WARRANTY SERVICE IS REQUESTED. |
|
|
|
|
|
| |||||||
Subject to the OBLIGATIONS above and EXCLUSIONS below, SANYO Fisher Company warrants this SANYO product | For your protection in the event of theft or loss of this product, please fill in the information below for you own personal | ||||||||||||
against defects in materials and workmanship for the periods specified below. SFC will repair or replace (at its option) | records. |
|
|
|
| ||||||||
the product and any of its parts which fail to conform to this warranty. The warranty period commences on the date the | Model No. |
|
| Serial No. |
| ||||||||
product was first purchased or rented at retail. |
|
|
|
| |||||||||
|
|
|
|
|
|
| (Located on back or bottom side of unit.) | ||||||
|
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
| |
| LABOR |
| PARTS | IMAGE DEVICE |
| Date of Purchase |
| Purchase Price | |||||
|
|
|
|
|
|
|
|
|
|
|
|
| |
| 3 YEARS |
| 3 YEARS | 3 YEARS |
| Where Purchased |
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|