CONNECTIONS

(A)

1

2

3

(Video signal connections)

: VIDEO IN : VIDEO OUT

Basic connection for monitoring or recording

The peripheral devices (VCR, monitor, lens, etc.) and cables are sold separately.

1Make the video signal connection between the camera and the monitor or time lapse VCR.

2Connect DC connecting cord from the AC adaptor to the 12 V DC input terminal on the camera.

•When using this unit, the supplied clamping core (A) must be installed on the power cord, in order to prevent electromagnetic interference to the other devices connected.

WARNING:

•This AC adaptor is specially conceived for this camera. Never use another type of AC adaptor with this camera, and do not use this AC adaptor to power other types of cameras.

•Not for use with toys.

•Never try to disassemble or modify the AC adaptor.

3Insert the plug of this power cord into a wall outlet.

The POWER indicator (A) will light. Adjust the picture on the monitor using the Brightness and Contrast controls.

Coaxial cable type and maximum length

•Cable type RG-59U (3C-2V), 250 m maximum.

•Cable type RG-6U (5C-2V), 500 m maximum.

•Cable type RG-11U (7C-2V), 600 m maximum.

CAUTION:

•The RG-59U type cable should not be run through electrical conduits or through the air.

•Using CCTV/Video-grade coaxial cable.

8 English