SETTINGS

Iris function setting

This should normally be set to the down (AI) position.

Use a manual or fixed iris lens and set the lens aperture to the shortest F stop. Set the switch 1 (IRIS) to the up (EI) position.

Aperture

If you would like to emphasize the contours of the object, set the switch 2 (AP) to the up (SHRP) position.

2

1

☞When using an auto-iris lens (for indoor/outdoor use) Set the switch 1 (IRIS) to the down (AI) position.

Note:

•The electronic iris is suitable for normal indoor use. When the switch 1 (IRIS) is set to the up (EI) position, do not use an auto-iris lens.

•If used under fluorescent light, the image may flicker. In such a case, change to incandescent lighting or set the switch 1 (IRIS) to the down (AI) position and use an auto-iris lens.

•When shooting bright subjects, pay attention to the light angle in order to avoid or minimize the smear phenomenon effect.

•If conditions are outside the electronic iris operation range or more than the maximum illumination, it will cause saturation of the CCD. In that case, use a manual iris lens.

12 English