Sanyo VCC-6594 instruction manual Hole 1/4-20 UNC, Lens mount cap

L53H4/US (VCC-6594) GB 2001, 11, 9

PARTS NAMES

5		7
	6
8
1	2	3 2
	1
1 Shorter screws: M3 x 4
2 Longer screws: M3 x 6
3 Camera mounting screw
hole: 1/4"-20 UNC
English 5

5Lens mount cap

The cap is installed to protect the lens mount section.

Remove the lens mount cap before installing a lens (sold separately).

6Flange-back adjustment screw (FLANGE BACK ADJ.)

7Flange-back lock screw (FLANGE BACK LOCK)

8Camera installation bracket

The bracket can be fixed at the top or bottom of the camera. When fixing the bracket, be sure to use the longer screws and install the shorter screws on the opposite side to seal the openings.

CAUTION:

When installing the camera support, select a location that can support the total weight of the camera and accessories.