Name and Function of Each Component

❼SD (SDHC) Card Slot

When recording live video onto an SD memory card, insert the card into the slot. For details, refer to “Installing and formatting recording media” section on the electronic manual.

❽LAN Connector (RJ-45)

Use this socket to connect the camera to your PC to enable network operation. For details, refer to the “Basic Connections” ( Page 6) section.

•Link access indicator (Green):

This indicator lights up approx. 3 seconds after power on, if a connection has been established between the camera and the network. After that, it will blink when data are being transmitted via the network.

•Speed indicator (Orange):

The camera automatically detects the local network transmission speed (10BASE-T or 100BASE-TX).

This indicator lights up when 100BASE-TX data transmission is in progress; it goes out when 10BASE-T data transmission is in progress.

❾Monitor output terminal for video adjustment

Connect this terminal to a monitor, etc. A live video will be displayed on the monitor

once the camera is turned on. For details, refer to the “Basic Connections” ( Page 6) section.

While displaying live video, the current zoom magnification is displayed on the

screen.

 

<Zoom magnification display>

 

• Optical zoom area: ×1.0 to ×10.0

 

• Electronic zoom area: ×11 to ×160

 

Zoom magnification settings (ex. enabling/disabling

 

the magnification display, displaying position) can be

 

configured via network operation on the VIDEO &

x 10.0

AUDIO SETTINGS (TV OUT) screen.

0HD video output terminal (HDMI)

The terminal outputs super-fine HD (High Definition) video signal. Use the terminal to connect a high-definition monitor with HDMI interface.

For details, refer to the “Basic Connections” ( Page 6) section.

3