Sanyo VMC-L1015, VMC-L1019 #A758/%Computer.AADQQMdisplay!adjustment$%, Choose the adjustment item

.￿/*#A75￿8/%￿Computer.￿￿￿￿A￿￿￿￿A￿￿￿￿￿￿DQQM￿￿￿￿￿￿￿￿￿￿￿display￿!"adjustment$%"&'￿￿(￿￿)

: Adjustment method for VGA signal selection

■Operation

1Press the adjustment control (MENU).

RAt the top of the screen, an adjustment panel as shown in the diagram to the right will be displayed.

2Choose the adjustment item.

		Down	Up
MENU		3Change the setting value.
1	2	3

4If necessary, repeat steps 2 and 3.

Adjustment item	Setting value
VGA IN	1024x768@60Hz
Brightness	25
Contrast	25
H-Position	25
V-Position	31
Clock	25
Phase	13
Color Temp.	User color
User Color R	51
User Color G	51
User Color B	51
OSD H-Pos.	25
OSD V-Pos.	25
Volume	30
PIP	Off
Language	English
Recall

•Pressing the adjustment control (MENU) again, or waiting for a number of seconds will cause the adjustment panel to disappear.

■Adjustment item

Item	Description	Parameters	Default setting
Brightness	Adjust the brightness.	0 – 51	25
Contrast	Adjust the contrast.	0 – 51	25
H-Position*	Adjust the horizontal position of the display.	0 – 51	25
V-Position*	Adjust the vertical position of the display.	0 – 51	31
Clock*	Adjust the clock (when vertical lines can be seen etc.).	0 – 51	25
	• Make fine adjustments until the vertical lines disappear. Adjusting the
	clock will also change the width of the display.
Phase*	Adjust the phase (when the screen is flickering, etc.).	0 – 51	13
Color Temp.	Select the color temperature.	9300°K, 6500°K,	User color
		User color
User Color R	Adjust the Red (when Color temp. is set to User color).	0 – 51	51
User Color G	Adjust the Green (when Color temp. is set to User color).	0 – 51	51
User Color B	Adjust the Blue (when Color temp. is set to User color).	0 – 51	51
OSD H-Pos.	Adjust the horizontal position of the adjustment panel.	0 – 51	25
OSD V-Pos.	Adjust the vertical position of the adjustment panel.	0 – 51	25
Volume	Adjust the volume.	0 – 51	30
PIP	Select to use Picture in Picture, showing an additional smaller	Composite, S-Video,	Off
	display in the upper left corner.	Component, Off
		English, Chinese,
Language	Select the language of the adjustment panel.	French, German,	English
		Spanish, Italian,
		Japanese
Recall	Pressing the +, – buttons together will return the settings to the	–	–
	default value.

*Use this when pressing the automatic display adjustment control (AUTO) (page 5) does not achieve the desired result. Also, by pressing the automatic display adjustment control (AUTO), these values will be changed.

•The settings will be retained even if the unit is switched off, but if the power supply is disconnected, settings will return to default.

•The default language display is English. If the language setting is changed, the menu display will be in the language chosen.

– 7 –