HINT

Recharging when connected to the USB terminal (page 9 in the SANYO Software Pack INSTRUCTION MANUAL)

i The battery can be recharged while the camera is connected to a computer.

i Note, however, that the time it takes to recharge will differ depending on the camera’s operating condition.

i Connect the dedicated USB interface cable to the USB connector on your computer. Do not connect it to the USB connector on the monitor or the keyboard, or to the USB hub.

i When the surrounding temperature is high, depending on the camera’s operating condition and the battery pack temperature, in some cases the multi-indicator may slowly flash red and the battery pack cannot be charged.

i If the camera is not going to be used for an extended period of time, please disconnect the dedicated USB interface cable from the camera.

English 22