RECORDING MENU 2

Motion compensation (image stabilizer) setting

Your camera can minimize a jittery picture by compensating for unintentional hand motion.

HINT

If the motion compensation does not seem to be working...

i Due to the mechanical characteristics of this function, it may not be possible for the camera to compensate for violent motion.

i If the digital zoom (page 70) is being used, the large magnification factor may make it difficult for the motion compensation function to work correctly.

i When the scene select function is set to night view portrait /or lamp Q, the motion compensation effect may be insignificant.

Can’t set the “photo stabilizer” setting?

i The photo stabilizer is automatically turned off ] after any of the following operations.

hSetting the exposure to T, gor H(pages 54 and 97).

hSetting the photo wide D-range setting (pages 54 and 99) to “ON”.

hSetting the still image NR (noise reduction) setting (page 126) to “ON”. h Starting video clip recording.

h Setting the camera to the sequential shots mode (pages 50 and 89).

When motion compensation is enabled,

i The following icons are shown on the monitor:

Full-HD

00:04:30

 

 

 

 

The video stabilizer is active

The photo stabilizer is active

Both the video stabilizer and the photo stabilizer are active

Did the scene select setting change?

i When the photo stabilizer is set to \, if the scene select setting is +, it will automatically change to =.

NORMAL/SHOOTING

English 92