PLAYING BACK ON A TV

i After connecting the camera to the television, switch the TV input to the terminal to which the camera is connected.

i When the camera is connected to a TV, no image appears on the camera’s monitor.

i The playback method is the same as when viewing images on the camera’s monitor.

Audio playback: see page 88

i The remote control unit can be used for playback (page 72).

i The same playback procedure as when playing back with the camera is used to play back audio recordings as well.

i Use the TV controls to adjust the playback volume. The camera’s controls will not work to adjust the volume.

CAUTION

Insert and pull out the cable carefully

i When connecting the cables, make sure that the cable plugs are correctly oriented and that they match the shapes of the terminal sockets on the devices. Push the plugs in straight when connecting them. If undue force is used to connect a cable, it may permanently damage the connector pins in the terminal socket.

i Do not use excessive force when connecting and disconnecting cables.

HINT

About the display when the “PAL” TV system is selected (page 132) and the supplied S-AV interface cable is used to connect the camera to the

TV

During recording: The image appears on the monitor only; it does not appear on the TV.

During playback: The image appears on the TV only; it does not appear on the monitor.

TV A TO CONNECTING

English 148