HINT

If the motion compensation does not seem to be working...

i Due to the mechanical characteristics of this function, it may not be possible for the camera to compensate for violent motion.

i If the digital zoom (page 81) is being used, the large magnification factor may make it difficult for the motion compensation function to work correctly.

Can’t set the “photo stabilizer” setting?

i The photo stabilizer is automatically turned off ] after any of the following operations.

hPressing the flash button [?] to open the flash unit. h Setting the exposure to T, gor H(page 114).

h Setting the photo wide D-range setting (page 117) to “ON”.

h Setting the still image NR (noise reduction) setting (page 153) to “ON”. h Setting the flicker reduction setting (page 156) to “ON”.

h Starting video clip recording.

h Setting the camera to the sequential shots mode (page 95).

When motion compensation is enabled,

i The following icons are shown on the monitor:

Full-HD
00:04:30

 

 

 

 

The movie stabilizer is active

The photo stabilizer is active

Both the movie stabilizer and the photo stabilizer are active

Did the scene select setting change?

i When the motion compensation is set to \, if the scene select setting is /, + or Q, it will automatically change to =.

NORMAL/SHOOTING

English 106