Sanyo VPC-HD2 PREPARING THE POWER, Recharging when the cable adaptor is connected, Recharging when the docking station is connected

PREPARING THE POWER

About using the docking station/cable adaptor for recharging

The recharging operation differs depending on the position of the camera’s main switch and on the power ON/OFF status.

Recharging when the docking station is connected

		Camera power
Main switch	1	OFF	Power save
	ON*		mode*2
	Recharges	Recharges	Recharges
	Does not	4
	recharge*3	Recharges*	Recharges

*1 After one continuous hour of no recording or playback, the camera switches to the power save mode (page 35).

*2 If the operation mode button on the docking station is pressed, the camera turns on.

*3 If the operation mode button on the docking station is pressed, the camera turns off and recharging begins.

*4 If the operation mode button on the docking station is pressed, the camera turns on and recharging stops.

Recharging when the cable adaptor is connected

	Camera power
Main switch	OFF	Power save
ON*		mode
Recharges	Recharges	Recharges
Does not	Recharges	Recharges
recharge

*After one continuous hour of no recording or playback, the camera switches to the power save mode (page 35).

33English