Manuals / Brands / Photography / Camcorder / Sanyo / Photography / Camcorder

Sanyo VPC-HD2000, VPC-HD2000EX, VPC-HD2000GX For playback:, For recording:, 1 Turn on the camera (page 8), 2 Set the REC/PLAY switch to the desired mode

1 28

Download 28 pages, 568.75 Kb

SWITCHING BETWEEN THE RECORDING MODE AND PLAYBACK MODE

Switch between the recording mode (for recording) and the playback mode (for viewing your recorded images).

1 Turn on the camera (page 8).

REC/PLAY button

2 Set the REC/PLAY switch to the desired mode.For recording:

Set it to REC.

For playback:

Set it to PLAY.

Recording Playback

mode mode

Contents

English CONTENTS ABOUT THIS MANUAL PARTS NAMES Page INSTALLING THE CARD CHARGING THE BATTERY PACK 3 Replace the battery cover <To remove the battery pack 4 Close the camera’s monitor unit, and set the camera in the docking station TURNING THE CAMERA ON AND OFF DATE AND TIME SETTING 3 Set the clock 4 Set the order in which the date is displayed during playback 5 Press the MENU button 1 Turn on the camera (page 8) 2 Set the REC/PLAY switch to the desired mode For recording: For playback: SIMPLE MODE/NORMAL MODE 1 Set the camera to the recording or playback mode To access the Recording Menu: To access the Playback Menu: 2 Set the camera to the SIMPLE mode or NORMAL mode To select the SIMPLE mode: Set the switch to SIMPLE 3 Press the MENU button RECORDING MENU VIDEO PHOTO 12M To keep in HDTV size HDTV size 8M [4:3] <Setting Screen English 12M 4000×3000 3264×2448 3264×1840 [16:9] 1920×1080 [16:9] 1600×1200 HINT About the applicable mode indicator VIDEO CLIP RECORDING SHOOTING SINGLE SHOTS 1 Press the mbutton to open the flash unit Select the desired flash operation, and press the SET button Press the ] button to take the picture PLAYING BACK VIDEO CLIPS AND STILL IMAGES To do this Do this Louder: Softer: If the a appears on the playback Screen 1 Display the Playback Screen, and SLIDESHOW press the MENU button ALL USING THE Xacti Library 4 Select “BEGIN TRANSFER” and press the SET button 5 Press the SET button After step 1, does the screen to create a library appear 2009.12.26 ROLL001