Protecting Images

Set the data to read-only to prevent images from being erased by mistake.

1.

Press the [

] button.

2.

Select the image that you want to protect with the e / f buttons.

3.

Press the

button.

4.

Select [Protect] with the c / d buttons, and press the

 

 

 

 

button.

 

 

 

 

5.

Select [Single] or [All] with the c / d buttons, and press

 

the

button.

6.Select [Set] with the c / d buttons, and press the button.

„ Protection is applied to the image and the camera

 

 

returns to the playback mode.

 

 

 

Play

 

„ The protect icon [

] is displayed with protected images.

Protect

 

 

 

 

When [All] has been selected, [ ] is displayed

 

 

 

 

 

 

 

with all the images.

 

 

 

 

 

 

 

 

 

 

 

 

Canceling the Protection

 

 

 

 

 

To cancel protection for only one image, display the image on which

 

 

 

 

 

MENU:Exit

SET:Enter

you want to remove the image protection.

 

 

 

 

 

1.

Select [Protect] with the c / d buttons from the playback

 

 

 

 

 

 

menu, and press the

 

button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2.

Select [Single] or [All]

with the c / d buttons, and press

 

 

 

 

 

 

the

 

button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3.

Select

[Cancel Protect] with the c / d buttons, and press

 

 

 

 

 

 

 

 

 

 

 

the

 

button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

„The removal of image protection is executed and the

camera returns to the playback mode.

„Formatting an SD/SDHC memory card overrides protection, and erases all images regardless of their protected status.

EN-30