Page
Warning
WARNING:
Declaration of Conformity
hPower Supply Cord:
Cord Type
Basic Cord Type
Other Suitable Types
hCable de alimentación:
Tipo de cable
Tipo de cable básico
Otros tipos adecuados
Note:
SANYO FISHER Sales (Europe) GmbH
SANYO Electric Co., Ltd
kSETUP
k BASIC OPERATION
kAPPENDICES
HINT
CAUTION
1 Use the supplied charger to charge the battery pack
2 Open the battery/card compartment cover, and insert the battery pack
1 Press the [m] button
2 Press the [l] or [m] button to select the recording mode
4 Press the shutter button. Single-shotmode:
Video clip recording mode:
<Recording mode
1 Press the playback button [=]
2 Press the SET button
<Video Clip Playback
Screen
Page
Page
Page
Page
Installing/removing the DC adaptor (Model VAR-A3:sold separately)
1 Open the camera's battery/card compartment cover
2Insert the DC adaptor into the battery slot
3Close the battery/card
compartment cover
Page
Page
1 Connect the supplied power cord to the socket on the battery pack charger
2 Insert the battery pack in the battery charger
3 Plug the power plug into a power outlet (AC 100 V to 240 V)
Does the battery pack feel hot
If there is interference to your TV or radio during charging
Ambient temperature during charging
Charge a battery pack in the following cases
FOR AMERICAN USERS:
CHARGE indicator
Does the battery pack appear swollen
About the internal backup battery
When not using the camera for a long time, remove the battery pack
To prolong the life of the battery pack
Page
Be careful when removing the card
Keep your finger on the card until it is completely inserted or released
Shooting without a card installed
1 Press the ON/OFF button
1 Press the playback button [=] for
at least one second
<If the camera was turned on by pressing the playback button [=]
If the K icon appears
1 Press the ON/OFF button to turn the camera on, and press the MENU button
2 Press the [o] button to select the
4 Set the date and time
5 Press the SET button
To correct the date and time settings
Press the ON/OFF button to turn
the camera on
Press the playback button [=]
<Playback mode
To turn the camera on in the playback mode
Press the ON/OFF button to turn the camera on
2 Press the [m] button
3 Press the [m] button to select the recording mode
4 Press the SET button
1 Press the ON/OFF button to turn the camera on
<Settings display mode
<Normal display mode
2 Press the MENU button for at least 1 second
3 Press the [n] and [o] buttons to adjust the brightness
4 Press the MENU button
Muting the camera sounds
Where is the image data saved
Taking pictures in backlight conditions
Switching the guidance display ON/OFF
<Guidance display ON
Set the camera to the single
shot mode (page 20)
Rest your finger on the
shutter button
3 Gently press the shutter
1/2
4 Release your finger from the shutter button
About the target mark
About the focus indicator
The shutter speed and aperture are displayed
2 Press the shutter button to start shooting
■Estimated maximum number of sequential shots
<Sequential shots mode
About the focus when shooting sequential shots
Can the self-timerand/or flash be used
2 View other images
For still images with voice memo (pages 40 and 41)
2 Press [W] ([P]) on the zoom switch
3 Select the image to play back
1 100SANPH
2 101SANPH
3 102SANPH
1 Display the image that you want to magnify
2 Press [T] ([]]) on the zoom
switch
100% Move
To magnify:
1 Display a still image to view using zoom jump playback
2 Set the camera to the playback mode, and press the [n] button
ALL FILES: Deletes all the files
1 FILE:
3 Delete the files
<To delete all the files
<To delete one file
About protected images
1 Set the camera to the video
clip recording mode
(page 20)
2 Press the shutter button. h Video clip recording
3 End the recording
4 Press the playback button [=]
PLAY
To do this
Do this
Louder:
Softer:
How to save one frame from a video clip as a still image
The data for a video clip is very large
If video clip recording stops even when there is card memory remaining…
If no audio is heard
During video clip playback, the sound of a motor is audible
1 Set the camera to the recording mode (page 19), and press the SCENE button
2 Use the arrow buttons to select the desired setting
<Features of each scene function
AUTO
Use auto settings
Page
2 Press the shutter button to take the picture, then speak into the microphone
2 Press the shutter button
<To save all four images
3 Use the arrow buttons to move the orange frame to the image you wish to save
1 On the screen to select a scene function (page 39), select r, and
press the SET button
2 Aim the camera lens at the subject
3 The focus locks on the subject (page 24)
4 Press the shutter button
Page
The camera can't detect the smiling face
For best results with Smile Detection
Can't use the self-timer
To cancel Smile Detection
3 Take the picture
Can’t access the digital zoom
Can’t access the optical zoom
Page
3 Press the shutter button
When auto is selected
When auto or red-eyereduction is selected
1 Set the camera to the single-shot
mode (page 20), and press the[m] ( ) button
[m] ( ) button
To pause or cancel the self-timerfunction
When xis selected
1 Set the camera to the recording
mode (page 19), and press the [o]
(R) button
<Still image shooting
<Video clip recording
Page
70cm
Still images:
Video clips:
Audio recordings: