Saris 6200, 6400 manual Park-A-Bike, Parts List, Step

Park-A-Bike
Owner’s manual
	6200 & 6400 Series Assembly Instructions*
	Parts List
	**Double/Single Park-A-Bike
FINALLY – A	Item#	Part#	Qty(Dbl/Sgl)	Description
COMPANY THAT	1	6201-63	8/6	3/8”-16x 301/4” hex bolt
LOVES BIKES AS	2	1070-73	8/6	3/8”-16 nut
	3	6101-31	12/10	1-5/8” dia.end cap
MUCH AS YOU DO.
	4	1070-85	8/6	3/8” split lock washer
Chances are, your bikes are just like	*Note: Single sided racks come with one brace pole.
ours - your most valued possessions.	**Double sided unit pictured in illustrations.
And if it has the Saris name on it,
nothing we build goes out the door
unless it’s worth putting those	Step 1
possessions on. Call it obsessive. Call
it eccentric. We just chalk it up to	Place end caps over ends of tubing (Fig. 1)
caring a hell of a lot about creating
the last rack you’ll ever need.	Step 2
	Align holes in grid section with mating holes in end section (Fig. 2)
3	Step 3
	At the top of grid, insert a 3/8”-16 x 3-1/4” hex head bolt down through tubes
Note: Single side	and fasten finger tight with a 3/8”-16 nut (Fig. 3).
	Repeat at opposite end of grid.
unit contains only	Step 4
one brace pole.

	At the bottom of grid, once again insert bolt down through tubing and fasten
	finger tight with a 3/8” split lock washer and 3/8”-16 nut (Fig. 2)
	Repeat at opposite end of grid.
	1
	4
Fig. 1	2
Step 5
Attach brace poles to each end section,
securing as in step 4 (fig. 2)	Fig. 3
Step 6
Tighten all hardware completely.	Grid
Important Notes:
Always consider safety when choosing a
location for your parking system. Injury may	Brace
result from unsafe placement due to tripping
	poll
over or falling on the unit. For safe place-
ment, determine actual size with bikes
parked in the system.
	End
	section
	Brace
	pole
	Fig. 2