Unit 4: Operation
SATO GT4xxe Series Operator Manual PN 9001138B Page 4-2
CONFIGURATION MODES

This chapter provides an overview of the various configuration modes of the operation menu. All

of the following configuration activities are performed via the use of the operator panel located on

the printer front. However, many settings may also be controlled via software commands. In the

case of conflict between the software and control panel settings, the printer will always use the last

entered valid setting.

NORMAL MODE

When a print job is received, the LCD will display the number of labels to be printed and will

numerically descend as each label is printed.

Figure 4-1, Normal Mode
POWER
LINE
Printing
starts
ONLINE
QTY: 000000
Yes / No No
OFFLINE
000000
CANCEL
CANCEL or
software issued
print stop request
CANCEL PRINT JOB
COMPLETED
DATA SAVE
COMPLETED
Yes / No
ENTER
LINE
CANCEL PRINT JOB
YES NO
PAUSE
QTY: 000000
ENTER+ for 5 seconds
DATA SAVE START
YES NO
ENTER +
Refer
to Hex Dump
flow chart.
Refer
to Advanced
Mode flow
chart.
Refer
to SEMBL
Mode flow
chart.
Refer
to Cartridge
Mode flow
chart.
Refer
to Interface
Mode flow
chart.
Refer
to User
Mode flow
chart.
COPYING
0 100