SATO GY412 manual Label size, Continuous type, Tear-off type, Cutter type

Section 3: Basic Specifications

Model name	GY412
Label size	Label size
	Continuous type
	Pitch: 1.18 to 11.81 in./30 to 300 mm. (Backing paper 1.29 to 11.9 in./33 to 303
	mm)
	Width: 1.96 to 5.15 in./50 to 131 mm.(Backing paper 2.04 to 5.19 in./ 50 to 132
	mm.)
	22 to 107 mm (Backing paper 25 to 110 mm)
	Tear-off type
	Pitch:
	1.18 to 11.81 in./30 to 300 mm.
	(Backing paper 1.29 to 11.9 in./33 to 303 mm.
	Width:
	1.96 to 5.15 in. / 50 to 131 mm.
	(Backing paper 2.04 to 5.19 in./ 50 to 132 mm.
	Cutter type
	Pitch:
	1.18 to 11.81 in./ 30 to 300 mm.
	(Backing paper 1.29 to 11.9 in./30 to 303 mm.)
	Width:
	1.96 to 5.15 in./50 to 131 mm.
	(Backing paper 2.04 to 5.19 in./52 to 132 mm
	Some restrictions may apply to the label size, depending on the print quantity,
	label type, and usage environment.
Label issuing	Continuous mode, Tear off mode, Cutter mode
mode
Dimensions	8.38” (W) x 11.92”(D) x 11.06” (H)
	213 (W) x 303 (D) x 281 (H) mm.
Weight	29.76 pounds; Approximately 13.5 kg
Power specifica-	Input power voltage: AC 100V to 240V +/-10%
tions	Power consumption
	At peak: 140 W 140VA (at 30% print ratio)
	During standby: 11 W 14VA
Environmental	Operating environment: 32 to 104°F / 0 to 40°C
conditions (tem-	30 to 80% RH (However, no condensation)
perature and
humidity)	(These ranges do not include labels and other supplies.)

Page 3-2 GY412 Quick Guide