SBC comm LI900SBC manual Introduction, About the LI900, Possible Set-ups

Introduction

Introduction

Note: In this user guide Pronto is used for both ProntoPro and Pronto remote controls.

LI900 is compatible with RU950 and RU970.

About the LI900

Most remote control systems have to be operated by pointing the remote control directly towards a device. Any obstacle between the remote control and the device disturbs the operating signal. But what if you like to place your devices inside a closed cabinet, a closet or even in another room?

The LI900 provides the solution to overcome obstacles like furniture or walls. Your devices no longer have to be placed in line of sight but can be operated from virtually any location. The LI900 is a RF Extender that is used in combination with the Pronto Remote Control. The RF Extender receives radio frequency (RF) signals sent out by the Pronto and converts them into infrared (IR) signals.

These IR signals are then sent out to your TV, DVD, preamplifier and so on.

RF signals IR signals

Pronto RF Extender

User Guide

Introduction

Possible Set-ups

The RF Extender can be used in several situations:

•Your devices can be remotely controlled while the RF Extender is placed in line of sight (situation A).

•The RF Extender controls devices placed in an adjacent room (situation B).

•The RF Extender is placed inside a closet, a rack or another piece of furniture together with your devices (situation C).

•The set-ups in situation A, B and C can be combined. If you want to control devices in different locations, you have to place a RF Extender in each location. You can control all RF Extenders with the same Pronto Remote Control. See Multiple RF Extenders on p. 9 to apply the necessary settings.

Situation B

Situation C

Situation A

User Guide

4 5