SAFETY INSTRUCTIONS - CONT’D
16.Keep the machine and attachments in good operating condition. Make sure all safety devices and shields are in place and operate the equipment as intended.
17.Keep all nuts, bolts, and screws tight to be sure equipment is in safe operating condition.
18.Never store the equipment with gasoline in the tank in a building where fumes may reach an open flame or spark. Allow the engine to cool before storing the machine in any enclosure.
19.To reduce fire hazard, keep the engine free of grass, leaves, or excess lubricants.
20.If the machine or attachments strike a foreign object, disengage the power to the attachments and stop the engine immediately. Wait for all moving parts to stop, then inspect for damage. Repair the damage before restarting or operating the equipment.
21.Do not change the engine governor settings or overspeed the engine.
22.When using the machine with a mower:
a.Mow only in daylight or good artificial light.
b.Never dismount the machine to adjust the cutting height while the engine is running.
c.Shut the engine off and remove the key before removing the grass catcher or unclogging the chute.
d.Check the blade mounting bolts frequently for proper tightness.
23.Disengage the power to the blades before backing up. Do not mow in reverse unless absolutely necessary and then only after careful observation of the entire area behind the mower.
24.The discharge chute must be installed and be in the down position on a side discharge mower except when the optional grass catcher or the mulching plate is completely installed. If the discharge chute clogs, shut the engine off, remove the key, and wait for all movement to stop before removing any obstruction.
25.Perform only the maintenance described in this manual. If additional maintenance or major repairs are needed, contact an authorized Scag Servicing Dealer. To ensure optimum performance and safety, always purchase genuine Scag replacement parts and accessories. Never use “WILL FIT” replace- ment parts and accessories made by another manu- facturer. Using such parts may void the warranty.
WARNING:
Do not operate the machine while wearing sandals, tennis shoes, sneakers, or shorts. Also, do not wear loose fitting clothing which could get caught in mov- ing parts. Always wear long pants and substantial shoes.. Wearing safety glasses and safety shoes is advisable.
CAUTION:
Stop engine and remove key from ignition before making any adjustments. Wait for all moving parts to come to a complete stop before beginning work.
Engine and drive unit can get hot during operation. Allow engine and drive components to cool before making any adjustments.
WARNING:
To prevent personal injury or equipment damage, do not operate the machine without the cutter deck properly mounted.
2
