BEFORE OPERATING

WHILE OPERATING

1.Know the controls and how to stop quickly.

2.Do not allow children to operate the machine. Do not allow adults to operate the machine without proper instruction.

3.Remove all debris or other objects that might be picked up and thrown by the cutter blades. Keep all bystanders away from the mowing area.

4.Keep all shields, safety devices, and decals in place. If a shield, safety device or decal is defective or damaged, repair or replace it before operating. Also, check all nuts, bolts and screws for proper tightness, to assure the machine is in safe operating condition.

5.Do not operate the machine while wearing san- dals, tennis shoes, sneakers or shorts. Also, do not wear loose fitting clothing which could get caught in moving parts. Always wear long pants and substantial shoes. Wearing safety glasses and safety shoes is advisable and required by some local ordinances and insurance regulations.

6.Fill the fuel tank with clean, fresh gasoline, with a minimum octane rating of 87. Avoid spilling gasoline. Gasoline is highly flammable, handle it carefully.

A.Use an approved gasoline container.

B.Do not fill the tank while the engine is hot or running.

C.Do not smoke while handling gasoline.

D.Fill the fuel tank outdoors and up to approxi- mately 1" (25 mm) below the bottom of the filler neck.

E.Wipe up any spilled gasoline.

7.Before attempting to start the engine, shift the transmission into neutral, move the blade engage- ment switch to the OFF position, and move the neutral latches to neutral.

1.Start the engine when the neutral latches are in the neutral lock position, the cutter blades are disen- gaged, and the transmission is in neutral.

2.Do not run the engine in a confined area without adequate ventilation. Exhaust fumes are hazard- ous and could possibly be deadly.

3.Using the machine demands attention. To prevent loss of control:

A.Mow only in daylight or when there is good artificial light.

B.Watch for holes or other hidden hazards.

C.Do not drive close to a drop-off, ditch, creek bank, or other hazard.

D.Reduce speed when making sharp turns and when turning on hillsides.

E.Always be sure of your footing. Keep a firm hold on the handles and walk---never run.

F.Do not operate where conditions are slippery.

4.The discharge chute must always be installed and in the down position on the side discharge cutter deck except when the Scag optional grass catcher or mulching plate are properly installed. If the discharge area should plug, shut the engine off and wait for all movement to stop before remov- ing the obstruction.

5.Disengage the blades and wait for them to stop before crossing gravel drives, walks or roads.

6.Shut the engine off and wait until the blades come to a complete stop before removing the grass catcher container.

7.Never raise the cutter deck while the blades are rotating.

8.Always park the mower and/or start the engine on a level surface.

4

Page 8
Image 8
Scag Power Equipment SWU manual Before Operating While Operating, Do not operate where conditions are slippery

SWU specifications

Scag Power Equipment, a leading manufacturer in the outdoor power equipment industry, has established a reputation for its commitment to quality, performance, and innovation. One of their standout products is the SWU series, known for its durability and advanced technology designed to meet the demands of landscape professionals and serious homeowners alike.

The Scag SWU series is best known for its robust construction and superior mowing capabilities. Built with a heavy-duty steel frame, these mowers ensure long-lasting performance even under the toughest conditions. The SWU is equipped with a powerful engine, typically a commercial-grade Kohler or Vanguard engine, providing unparalleled power and efficiency. This means users can tackle larger lawns and more demanding terrain without the fear of stalling or bogging down.

One of the key features of the SWU series is its exceptional cutting technology. The mower's precision-engineered cutting deck is designed to deliver a smooth, even cut for a pristine finish. The deck height can be easily adjusted to suit various mowing needs, allowing for versatility in handling different grass types and conditions. Scag's proprietary blade design further enhances cutting performance, allowing users to efficiently mulch or bag grass clippings.

The SWU series also prioritizes user comfort and ease of operation. Ergonomically designed controls put everything within easy reach, ensuring a more enjoyable mowing experience. The seating is plush and adjustable, reducing fatigue during extended usage. Additionally, the SWU incorporates advanced vibration damping technology which minimizes operator fatigue, making it easier to handle large mowing tasks.

Maintenance is made simple with Scag's thoughtful design. The SWU features easy-access points that allow operators to check fluids, clean the deck, and perform routine maintenance without hassle. This not only prolongs the life of the mower but also keeps it operating at peak performance.

In summary, Scag Power Equipment's SWU series combines strength, precision, and user-friendly features to set a high standard in the mowing industry. With its powerful engines, advanced cutting technology, and focus on operator comfort, the SWU provides professional results for users seeking efficiency and reliability in their lawn care arsenal. Whether for commercial applications or residential use, the SWU series is a valuable addition to any landscaping toolkit.