Sceptre Technologies 2.1 How do I clean the Sound Bar?

Sound Bar 2.1 User Manual

How do I clean the Sound Bar?

IMPORTANT

1. The power cable has to be removed from the socket before cleaning the

Sound Bar.

2. Do not use volatile solvent (alcohol, rosin, and toluene) to clean the

Sound Bar. These types of chemicals might damage the housing .

Cleaning the bezel and remote control

1. Use a 100% cotton cloth or micro-fiber cloth for cleaning.

2. If the remote control or bezel is dirty to the point where you cannot

simply dry wipe it, please lightly dampen the wiping material (the wiping

material cannot be dripping wet, because if water drips into the

panel it will cause malfunction and possible permanent damage to

the speakers which will not be covered under the warranty) with

clean water and wipe again. Wipe the Sound Bar with a dry micro-fiber

cloth or 100% cotton cloth afterwards.

Please Note :

Make sure you wring the water out of the cloth before

cleaning the bezel or remote in order to prevent water

from penetrating into the electronics.