SCEPTRE E22 Page5
This product is designed and manufactured to operate within defin ed design limits, and misuse may
result in electric shock or fire. To prevent the product from being damaged, the following rules sh ould
be observed for the installation, use and maintenance of the produc t. Read the following safety
instructions before operating the display. Keep these instructions in a safe place f or future reference.
To avoid the risk of electric shock or
component damage, switch off the power
before connecting other components to the
E22 LED MONITOR.
Unplug the power c ord before cleaning the
E22 LED MONITOR. Do not use a liquid or
a spray cleaner for cleaning the product.
Do not use abrasive cleaners.
Always use the access ories recommended
by the manufacturer to insure compatibility.
W hen moving the E22 LED MONITOR
from an area of low temperature to an area
of high temperature, condensation may
form on the housing. Do not turn on the
E22 LED MONITOR immediately after this
to avoid causing fire, electric shock or
component damage.
Do not plac e the E22 LED MONITOR on
an unstable cart, stand, or table. If the E22
LED MONITOR falls, it can injure a person
and cause serious damage to the
appliance. Use only a cart or stand
recommended by the manufacturer or sold
with the E22 LED MONITOR.
Any heat s ource should maintain a
distance of at least 5 feet away from the
E22 LED MONITOR, i.e. radiator, heater,
oven, amplifier etc. Do not install the
product too close to anything that
produces smoke or moisture. Operating
the product close to smoke or moisture
may cause fire or electric shock.
Slots and openings in the back and bottom
of the bezel are provided for ventilation. To
ensure reliable operation of the E22 LED
MONITOR and to protect it from
overheating, be sure these openings are
not blocked or covered. Do not place the
E22 LED MONITOR in a bookcase or
cabinet unless proper ventilation is
provided.
It is not recomm ended to use the E22 LED
MONITOR in a portrait format (by rotating
90 degrees) under high temperature
environment (25°C or higher), since this
would retard heat dissipation and would
eventually damage the monitor.
Never push any object into the ventilation
slots of the E22 LED MONITOR. Do not
place any objects on the top of the Product.
It could short circuit parts causing a fire or
electric shock. Never spill liquids on the
E22 LED MONITOR.
The E22 LED MONITOR should be
operated only from the type of power
source indicated on the label. If you are not
sure of the type of power supplied to your
home, consult your dealer or local power
company.
The power c able must be replaced when
using different voltage from that specified
in the User Manual. For more information,
contact your dealer.
The E22 LED MONITOR is equipped with
a three-pronged grounded plug, a plug
with a third (grounding) pin. This plug will
fit only into a grounded power outlet as a
safety feature. If your outlet does not
accommodate the three-wire plug, have an
electrician install the correct outlet, or use
an adapter to ground the appliance safely.
Do not defeat the safety purpose of the
grounded plug.