Sceptre Technologies SCEPTRE HDTV, X409 - 12

- 12 -

www.SCEPTRE.com

SCEPTRE X409 HDTV User Manual

1. SPDIF - This connection port is used for sending out digital audio

signals to digital surround sound receivers. The orange (COAX

SPDIF OUT) connector sends out either bit-stream or PCM digital

sound signal to a home theater receiver with digital coax input.

2. TV – This connection is for digital or analog cable without the cable

box or over-the-airwave antennas. The tuner is a hybrid tuner that

tunes to both analog and digital channels. This connection uses

coaxial RF cable. For over-the airwave digital stations please check

http://www.antennaweb.org.

3. VGA - This connection port connects to a PC for video using VGA

cable. Be sure to connect your audio cable to the VGA Stereo input if

you want sound out of VGA video source.

4. Audio In - This connection port is for people who want to provide

audio to the TV when using a PC or a DVI video device. The sources

use 3.5mm mini-jack audio cable.

5. HDMI1-3 – HDMI connects to devices that use HDMI cable, such as

Blu-ray or HD DVD player, or HD cable / satellite set-top box. This

connection port receives pure digital audio and high definition signal

through one single cable. This port also can accept a HDCP video

device for video.

6. USB – USB connects to USB flash drives for playing music and

picture. The USB port is also used for updating the TV’s firmware.

7. YPbPr – This connection port is for DVD players or satellite / cable

set-top boxes that use component cables. From left to right, connect

green, blue, and red for video, and then connect red for right channel

audio, and white for left channel audio.