SCEPTRE X19 HDTV User Manual

- 21 -

www.SCEPTRE.com
Ready to Watch Some TV?

Starting up the X19 LCD HDTV

1. Make sure your power cable is connected and the standby red light in the
front of the TV is lit up.
2. Check all your connection cables off the side or the back of your TV and also
your AV devices. Make sure they are all connected securely.
3. Turn on your TV and other AV devices if necessary.
4. Select the correct source according to the Connecting pages.

If You’ve Connected Antenna or Cable to the TV…

If an antenna or cable (without a cable box) is connected to your TV’s tuner, you will
need to go through a setup process in order to watch the TV. When you turn on the TV
for the first time, follow through the instructions below to complete the setup and your
TV will be ready for viewing.
1. Locate your X19 remote control, and press MENU to start the setup. Use the
◄ or ► button to select the dish icon labeled TV and press ↵.
2. Use the ▲ or ▼ button to select TUNER MODE and use the ◄ or ► button
to select Cable or Air.