![](/images/new-backgrounds/1230562/23056295x1.webp)
Troubleshooting
The following table contains the common problems and the solutions to these problems. Please check this list before you contact the technicians.
| Problems |
| Solutions |
|
|
| Connect power cord correctly. |
|
|
|
|
| NO PICTURE |
| Turn on power. |
|
|
| |
|
| Connect video cable correctly. | |
|
|
| |
|
|
|
|
|
|
| Select the input signal source with proper cable connection with |
|
|
| the source button. |
|
|
|
|
| ABNORMAL |
| Match the colors on the cables to the ports off the back of the |
| COLORS |
| television. I.E. red cable to red colored port. |
|
|
|
|
| PICTURE IS TOO |
| Adjust your contrast, brightness and lamp settings from the |
| DARK |
| OSD Menu. For adjust controls, refer to page 28. |
|
|
|
|
| AUDIO ONLY NO |
| Make sure you have connected both your video and audio |
| PICTURE |
| cables. |
|
|
|
|
|
|
| The TV’s tuner signal must not be lower than 65 %. |
|
|
|
|
| PICTURE ONLY NO |
| Make sure the audio cable is connected. |
| AUDIO |
|
|
|
| Readjust your volume via the remote control. | |
|
|
| |
|
|
|
|
|
|
| The TV’s tuner signal must not be lower than 65 %. |
|
|
|
|
|
|
| Turn off the TV, unplug it from the socket. Remove the |
|
|
| batteries out of the remote for 30 seconds. Press the remote |
| REMOTE CONTROL |
| buttons and the power button randomly for a good 2 seconds, |
|
| and then reinstall the batteries. Try the remote to see if it | |
| DOES NOT WORK |
| works. For battery removal instructions, refer to page 17. |
|
|
|
|
|
|
| The TV’s remote sensor is also housed in the same place as |
|
|
| the power indicator light. Please make sure there is line of sight |
|
|
| from the remote control’s front sensor to the remote sensor of |
|
|
| the TV. |
|
|
|
|
| CANNOT RECEIVE |
| The TV’s tuner signal must not be lower than 65 %. Change |
| SUFFICIENT |
| the direction of your antenna and rescan your channels. If you |
| CHANNELS |
| have cable call up your cable company and ask about signal |
| THROUGH THE |
| strength of your local cable. |
| ATSC/NTSC TUNER |
|
|
|
|
|
|
|
|
| Please adjust your picture setup and make sure the saturation |
| NO COLOR |
| and the RGB are not turned all the way down. For adjustment |
|
| controls refer to page 28. | |
|
|
| |
|
|
|
|
- 48 -
www.SCEPTRE.com
SCEPTRE X505 HDTV User Manual