Schlage AL-SERIES manual Latches, Al S E R I E S, Long Backsets, Door Reinforcement

AL S E R I E S

Latches

AL-Series latches are adjustable for flat or beveled edge doors. Latches and strikes are furnished in brass, bronze, or chrome finishes compatible with lock trim. When ordering separately, specify quantity, part number, and finish.

Square Corner Latches

SpringlatchDeadlatch

Round Corner Latches

SpringlatchDeadlatch

Latch Front Adapter

A501-878

Used to convert 1" wide square front faceplates for 1⅛" wide door preparations. Furnished in black plastic. Order in units of 100 each.

Long Backsets

Backsets 5" and over require extension links. AL-Series locks with long backsets are normally furnished with 1" faceplates and ⅞" housings. Links installed in 1" latch holes require one G506-815 sleeve (order separately) to join latch and link. Backsets over 5" require an additional sleeve placed ⅛" from lock chasis. Information on longer backsets is available upon request.

Drive-In Latches

SpringlatchDeadlatch

Latches

	Faceplate	Hsg	Springlatch	Deadlatch
Backset			Z\x" (13 mm)	Z\x" (13 mm)
	Description	Dia
			Throw	Throw
	1" x 2Z\v" (25mm x 57mm)	M\,"	11-068	11-085
	square corner	(22mm)
2C\,"	1" x 2Z\v" (25mm x 57mm)	M\,"	11-069	11-088
(60mm)	Z\v" (6mm) radius rnd. cnr.	(22mm)
	1" (25mm) circular	1"	11-110	11-104
	drive-in (non-U.L.)	(25mm)
	1" x 2Z\v" (25mm x 57mm)	M\,"	11-111	11-091
	square corner	(22mm)
	1Z\," x 2Z\v" (29mm x 57mm)	1"	11-116	11-096
	square corner, standard	(25mm)
2C\v"
(70mm)	1" x 2Z\v" (25mm x 57mm)	M\,"
			11-112	11-092
	Z\v" (6mm) radius rnd. cnr.	(22mm)
	1" (25mm) circular	1"	11-113	11-105
	drive-in (non-U.L.)	(25mm)
3C\v"	1Z\," x 2Z\v" (29mm x 57mm)	1"	11-118	11-103
(95mm)	square corner	(25mm)

5” Extension Link	Sleeve
41-005	G506-815
(add to 2 3/8˝ backset latch)	(Order separately)

Door Reinforcement

Schlage® 37-001 reinforcing unit is used to reinforce and help prevent the collapse of hollow metal doors when locksets are

tightly mounted.	Door Prep
This kit should be used with long
backsets for AL-Series lock installations
in hollow metal doors to prevent lateral
movement of the latchbolt. Specify door
thickness, 1³/₈" (35 mm) or 1³/₄" (44 mm),
when ordering reinforcement kits.
Reinforcement Kit
37-001	Sleeve

Reinforcement

A501-566	A501-565
1C\v" (44mm) Doors	1C\," (35mm) Doors

6