4. Technical data General data

Operating voltage

DC 9.6 to 57.6 V safe extra-low voltage (SELV) (redundant inputs decoupled)

Current consumption

typ. 160 mA at 24 VDC

 

 

max. 190 mA at 24 VDC

 

 

 

 

Overload current protection at input

non-replaceable thermal fuse

 

Dimensions W x H x D

47 mm x 135 mm x 111 mm

1.9 in x 5.3 in x 4.4 in

Weight

230 g

0.51 lb

Ambient temperature

0 ºC to + 60 ºC

32 ºF to + 140 ºF

Storage temperature

- 20 ºC to + 80 ºC

-40 ºF to + 176 ºF

Humidity

10% to 90% (non condensing)

Protection class

IP 20

 

Laser protection

Class 1 conform to EN 60825

 

Radio interference level

EN 55022 Class A

 

 

Warning!

 

 

This is a Class A Equipment. This equipment may cause radio interference if used in a residential

 

area; in this case it is the operator´s responsibility to take appropriate measures.

Interference immunity

EN 50082-2

 

 

 

 

Network size

 

 

 

 

Transition

TP port ↔ F/O port and F/O port ↔ TP port

Propagation equivalent

2 x 42 BT = 84 BT

(1 BT = 10 ns)

TP line length (TP port ↔ TP port)

 

 

Length of a twisted pair segment

max. 100 m

(328 ft)

F/O port

 

 

According to IEEE 802.3u 100BASE-FX

 

 

System attenuation

 

 

50/125 µm fiber

8 dB

 

62,5/125 µm fiber

11 dB

 

Wave length

1300 nm

 

F/O line length (example)

 

 

50/125 µm fiber

3000 m (9843 ft) maximum

(data on fiber: 1.6 dB/km, 500 Mhz*km)

62,5/125 µm fiber

3000 m (9843 ft) maximum

(data on fiber: 2.6 dB/km, 500 Mhz*km)

Scope of delivery

 

 

 

 

 

Ethernet Transceiver 100 Mbps TX/FX incl.

 

 

terminal block for supply voltage

 

 

Quick reference guide

 

 

Order number

 

 

Ethernet transceiver 100 Mbps TX/FX

499NTR00100

 

 

 

 

Accessories

 

 

 

 

 

Ethernet SFTP cat5RJ45 cords

490NTW000ii

 

Ethernet SFTP cat5RJ45 crossed cords

490NTC000ii

 

Ethernet MTRJ/SC 5 m optical patch

490NOC00005

 

Ethernet MTRJ/ST 5 m optical patch

490NOT00005

 

Note: The optical patch is made up of two 62.5/12.5 multi mode glass fiber, used in 1300 nano-meter wavelengths.

Ethernet reference Manual

490USE13300

 

 

Notes on CE identification

The devices comply with the regulations of the following European directive:

89/336/EEC

Council Directive on the harmonisation of the legal regulations of member states on electromagnetic compatibility (amended by Directives 91/263/EEC, 92/31/EEC and 93/68/EEC).

Area used

Requirements for emitted interference

interference immunity

Industrial

EN 50081-2: 1993 EN 55022 Class A: 1998 EN 50082-2: 1995

The product can be used in the residential

The precondition for compliance with EMC limit

sphere (residential sphere, business and trade

values is strict adherence to the construction

sphere and small companies) and in the

guidelines specified in this description and

industrial sphere.

operating instructions.

Printed in Germany

Page 5 Page 6
Page 6
Image 6
Schneider Electric 100BASE-TX Technical data General data, Network size Transition, TP line length TP port ↔ TP port, Port
Page 5 Page 6

100BASE-FX, 100BASE-TX specifications

Schneider Electric, a global leader in digital transformation of energy management and automation, offers a variety of networking technologies, including 100BASE-TX and 100BASE-FX. These technologies are foundational in building robust and efficient local area networks (LAN), particularly for industrial applications, commercial enterprises, and smart buildings.

100BASE-TX is an Ethernet standard that operates over twisted-pair cabling, typically utilizing Category 5 or better cabling. This standard supports a data rate of 100 Mbps and has a maximum segment length of 100 meters. One of its main features is its simplicity and cost-effectiveness, enabling easy installation and maintenance. It uses two pairs of wires in the cable: one pair for sending data and the other for receiving. This full-duplex capability allows simultaneous transmission and reception of data, enhancing network efficiency.

100BASE-FX, on the other hand, is designed for fiber-optic networks. It operates over multimode fiber and provides the same 100 Mbps data rate as 100BASE-TX but supports longer cable lengths, up to 2 kilometers (2000 meters). 100BASE-FX includes features that are essential for environments that require high resistance to electromagnetic interference (EMI) and enhanced security. The fiber-optic medium minimizes signal degradation, making it suitable for data transmission over longer distances without loss of integrity.

Both 100BASE-TX and 100BASE-FX incorporate technologies such as auto-negotiation, allowing devices to detect the highest speed and mode available for communication. This compatibility promotes seamless integration between devices, making Schneider Electric's networking solutions versatile and scalable.

The rugged design of Schneider Electric’s networking equipment means that both standards can effectively operate in harsh industrial environments. Their products often feature robust enclosures that resist dust, moisture, and extreme temperatures, ensuring reliable performance over time.

Implementing these technologies enables Schneider Electric to support various applications, from manufacturing automation to smart grid solutions, aligning with the increasing demand for reliable and efficient networking infrastructures. Their 100BASE-TX and 100BASE-FX solutions are pivotal in constructing a more connected, automated, and intelligent world. Native support for these standards facilitates not just connectivity but also innovation in energy management and operational excellence.
Top Page Image Contents