11
Tips
Poor Picture •Have you selected the correct TV system in the manual installation menu?
Is your TV or house aerial located too close to loudspeakers,non-earthed audio
equipment or neon lights,etc.?
Mountains or high buildings can cause double pictures or ghost images.
Sometimes you can improve the picture quality by changing the direction of the
aerial.
Is the picture or teletext unrecognisable? Check if you have entered the correct
frequency.See Store TV channels,Manual store,p. 7.
No Picture •Are the cables connected properly ? (The aerial to your recorder,
the VGA cables to the display, the power cables.)
Is your PC switched on ?
Do you see a black screen and the indicator in front of the TV lights up green,
this means that the display mode is not supported.Switch your VGA-source to a
correct mode.
In case of weak or bad signal,consult your dealer.
Digital distortion The low quality of some digital picture material may be the cause of digital image
distortion.In this case select the Soft setting using the Smart picture key aon
the remote control.
No sound No sound on any channel? Check the volume isn’t at minimum.
Is the sound interrupted with the mute key ¬?
No solution found Switch your TV off and then on again once.Never attempt to repair a defective
for your picture or TV yourself. Check with your dealer or call a TV technician.
sound problem ?
Menu Have you selected the wrong menu? Press the MENUkey again to exit from the
menu.
Remote control Check if the remote control is in the correct mode.
If your TVno longer responds to the remote control,the batteries may be dead.
Standby Your TV consumes energy in the standby mode.Energy consumption contributes
to air and water pollution. Power consumption: >3W.
Miscellaneous .Ambient temperature:+ 5~ + 40°C
.Mains:50/60 Hz Auto Voltage ranging from 198 V to 264 V
.Power consumption:around 160 W
.Standby consumption:>3 W
.Weight (excl.packaging):42 kg
.Dimensions (wxhxd): 1077x660x90
Tips
2328.1 gb 07-03-2005 09:26 Pagina 11