K.INDICATIONS OF A FULLY CHARGED BATTERY

A hydrometer reading of the specific gravity of the electrolyte (fluid) of the battery in good condition should be between 1.25 and 1.28. When a battery reaches 80-85% of full charge, bubbles will appear on the surface of the fluid. As the battery nears full charge, bubbling will become more vigorous.

The digital display Meter will display FULL when the battery is completely charged.

L.

ASSEMBLY INSTRUCTIONS

Wheel Charger assembly instructions:

 

NOTE: Unit must be fully assembled before operating.

PARTS:

TOOLS NECESSARY:

HUBS MUST FACE IN

Fig. C

4

10-32 thread cutting screws

5/16" wrench

Fig. B

1

mounting foot

Hammer

2

wheels

Screwdriver

 

2

axle caps

 

 

2

axle brackets

 

 

1

handle

 

 

Fig. A

 

First place the charger on its side.

AXLE BRACKET

Next mount the mounting foot FIG. A with (2) 10-32 screws.

 

Next pound the axle firmly into an axle cap using a hammer, FIG. B.

—AXLE CAP

 

Next slide the wheels onto the axle, hubs must face in, FIG. C.

Fig. D

Next pound the other axle cap onto the other end of the axle.

Fig. E

Next place the axle assembly onto the bottom of the charger as shows in figure FIG. C. Mount the axle to the bottom of the charger using the two 10-32 thread cutting screws as shown in Fig. D (these screws require a 5/16" wrench.)

Next turn the battery charger right side up onto its foot and wheels.

Remove the two top screws from each side of the charger, line up the handle and reinstall the screws. FIG. E.

M.TROUBLESHOOTING

1.No meter reading

A.Make sure that the charger is plugged into the AC outlet.

B.Make sure that the AC outlet is "LIVE." Check by plugging in a lamp.

2.Meter displays CHK BAT

A.Have a serviceman, at your neighborhood garage, check that the battery is capable of taking a charge, it may be damaged or sulfated.

B.Make sure you have selected the proper charge voltage for the battery being charged.

C.After unplugging charger, check the connections at the battery. Make sure the clips are making good contact.

D.If the battery voltage is below 1.5 volts and you were charging in automatic, the display will read CHK BAT. Try to bring the battery voltage up above the needed 1.5 volts by selecting the MANUAL mode and the 2 amp setting. This should bring the battery voltage to the needed voltage in a few minutes.

3.Vehicle will not start in ENGINE START

A.Unplug the charger and check the connections at the battery.

B.You must wait until the meter read "RDY." The charger may still be in the "WAIT" mode.

C.The thermal protector may have tripped and needs a little longer to close. Wait a little longer and retry.

D.If the engine turns over, but doesn't start, the problem is with the vehicle, not the charger. Have the vehicle problem resolved before you try to crank the engine again.

N.WARRANTY

SCHUMACHER ELECTRIC CORPORATION, 801 BUSINESS CENTER DRIVE, MOUNT PROSPECT, ILLINOIS 60056-2179 MAKES THIS LIMITED WARRANTY TO THE ORIGINAL PURCHASER AT RETAIL OF THIS PRODUCT. THIS LIMITED WARRANTY IS NOT TRANS- FERABLE.

Schumacher Electric Corporation warrants this battery charger for five years from date of purchase at retail against defective material or workmanship. If such should occur, the unit will be repaired or replaced at the option of the manufacturer. It is the obligation of the purchaser to forward the unit together with proof of purchase, transportation and/or mailing changes prepaid to the manufac- turer or its authorized representative.

This limited warranty is void if the product is misuse, subjected to careless handling, or repaired by anyone other than the manufacturer or its authorized representative.

The manufacturer makes no warranty other than this limited warranty and expressly excludes any implied warranty including any warranty for consequential damages.

THIS IS THE ONLY EXPRESS LIMITED WARRANTY AND THE MANUFACTURER NEI- THER ASSUMES NOR AUTHORIZES ANYONE TOASSUME OR MAKE ANY OTHER OBLIGATION TOWARDS THE PRODUCT OTHER THAN THIS EXPRESS LIMITED WARRANTY. THE MANU- FACTURER MAKES NO WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE OF THIS PRODUCT AND EXPRESSLY EXCLUDES SUCH FROM THIS LIMITED WARRANTY.

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LENGTH OF IMPLIED WARRANTY SO THE ABOVE LIMITA- TIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTSAND YOU MAYALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE

471-1197

6

Page 6
Image 6
Schumacher 9500A owner manual Indications of a Fully Charged Battery, Assembly Instructions, Troubleshooting, Warranty

9500A specifications

The Schumacher 9500A is a top-tier battery charger and maintainer designed to meet the needs of both automotive enthusiasts and everyday drivers. Known for its reliability and advanced features, this charger offers cutting-edge technology that ensures optimal performance and safety for all types of 12V batteries.

One of the standout features of the Schumacher 9500A is its Smart Charge technology. This innovation provides automatic adjustments to the charging process by monitoring battery voltage and health. The charger can detect the level of charge in the battery and adjust its output to suit the current needs, providing a fast charge without risking damage to the battery. This not only enhances the longevity of the battery but also ensures it operates at peak efficiency.

Another significant feature of the Schumacher 9500A is its multi-stage charging system. This system involves a three-phase charging process: bulk, absorption, and float. During the bulk stage, the charger delivers maximum current to quickly recharge the battery. In the absorption stage, it reduces the current and maintain a safe charge level, ensuring a thorough recharge. Finally, the float stage allows the charger to maintain the battery at full capacity without overcharging, making it ideal for long-term storage.

The Schumacher 9500A is also equipped with advanced safety features, including reverse polarity protection and spark-proof clamps. These safety mechanisms provide users with peace of mind, preventing accidental damage to the battery or vehicle during the charging process. Additionally, the charger features an onboard microprocessor that regulates the charging process, preventing overcharging and overheating.

With a robust design and user-friendly interface, the Schumacher 9500A is suitable for a wide range of applications. It can handle various battery types, including lead-acid and AGM batteries, making it versatile for different vehicles like cars, trucks, motorcycles, and even boats. Its compact design allows for easy storage and portability, making it a convenient companion for emergency situations.

In conclusion, the Schumacher 9500A battery charger is an outstanding tool for anyone looking to maintain their vehicle's battery. With its advanced Smart Charge technology, multi-stage charging system, and exceptional safety features, it provides an efficient and reliable solution for battery management. Whether you are a casual driver or a dedicated automotive enthusiast, the Schumacher 9500A is an essential addition to your garage or toolkit.