chargeR CONTROLs

DIGITAL DISPLAY

DIGITAL DISPLAY BUTTON

Use this button to set the function of the digital display to one of the following.

•BATTERY %: The digital display shows an estimate of the percent of charge of the battery connected to the charger battery clamps.

•VOLTAGE: The digital display shows the voltage at the charger battery clamps in DC volts.

•ALTERNATOR %: The digital display shows an estimated percentage of the output of the vehicle charging system connected to the charger battery clamps as compared to a properly functioning system.

BATTERY TYPE BUTTON

Use this button to set the type of battery to be charged to one of the following.

•12V REGULAR: This is the type of battery usually used in cars, trucks, and motorcycles. These batteries have vent caps and are often marked “low maintenance” or “maintenance-free”.

•12V DEEP CYCLE: Deep cycle batter- ies are usually marked as “deep cycle” or “marine”. Deep cycle batteries are usually larger than the other types.

•12V AGM/GEL: AGM and gel cell bat- teries have sealed cases without vent caps. Such batteries are often smaller than the other types.

•6V REGULAR: This is the type of bat- tery usually used in antique and some specialized vehicles. The 6V REGULAR battery type is not selectable for batteries greater than 8.5V DC.

With the exception of AGM and gel cell batteries, all other battery types may or may not have vent caps. Vent caps are located on top of the battery and provide a means to add distilled water when needed. Batteries should be marked with their type. If charging a battery that is not marked, check the manual of the item that uses the battery. If the battery type is unknown, use the 12V Regular setting. Make sure the battery complies with the safety instructions on page 3.

CHARGE START BUTTON

Use this button to set the maximum charge rate to one of the following.

•SMALL BATTERY: Provides a charge rate of up to 2A. Intended for charging small batteries such as those commonly used in garden tractors, snow mobiles and motorcycles. The 2A rate is not intended to be used as a trickle charger for larger batteries.

•REGULAR BATTERY: Provides a charge rate of up to 12A30A de- pending on the battery. Use for charging normal or large batteries. Not intended for industrial applications.

•ENGINE START: Provides 80 amps for cranking an engine with a weak or run down battery.Always use in combination with a battery.

•OFF: Charger returns to tester mode and the SMALL BATTERY, REGULAR BATTERY, and ENGINE START LEDs all stay off.

Page 8 Page 10
Page 9
Image 9
Schumacher SC-8000A owner manual ChargeR CONTROLs, Digital Display Button, Battery Type Button, Charge Start Button
Page 8 Page 10

SC-8000A specifications

The Schumacher SC-8000A is an advanced battery charger and maintainer designed for both professional and home use. This unit stands out for its versatility and robust performance, making it an essential tool for any automotive enthusiast or technician. With its array of features, the SC-8000A caters to various battery types, ensuring optimal charging and maintenance.

One of the main features of the Schumacher SC-8000A is its ability to charge a wide range of battery types, including standard, AGM, and gel batteries. This compatibility ensures that users can effectively maintain and charge not only their cars but also motorcycles, ATVs, and marine applications. The charger's intelligent microprocessor technology monitors the battery's condition in real time. This feature provides automated adjustments to the charging process, ensuring that your battery is charged efficiently and safely.

The SC-8000A boasts a multi-stage charging process, which includes bulk charging, absorption, and float stages. This approach optimizes the charging cycle by allowing the battery to receive a full charge without being overcharged. The maintenance mode is particularly beneficial for batteries that are stored for extended periods, as it helps to keep them in peak condition without unnecessary wear.

Safety is a key consideration in the design of the SC-8000A. The charger is equipped with reverse hook-up protection, which prevents any damage by alerting the user if the clamps are connected improperly. Additionally, the unit features short-circuit protection and overcharge protection, ensuring that both the battery and the charger are safeguarded during the charging process.

This model also features a built-in digital display that makes it easy for users to monitor the charging progress. Its compact design and lightweight construction enhance its portability, allowing users to take it on the go or store it conveniently when not in use.

In summary, the Schumacher SC-8000A combines advanced charging technology, safety features, and compatibility with various battery types. Whether for routine vehicle maintenance or emergency battery charging, it is an excellent choice for those seeking a reliable and efficient charger.
Top Page Image Contents