Schumacher SE-1 manual Speed Charge Maintainer

Speed Charge Maintainer

 1.5-Amp Charger and Maintainer
 Fully Automatic – once battery is charged, unit
	switches from Full Charge to Float-Mode Monitoring
	Microprocessor Controlled
	Automatic Voltage Detection
	Automatic Temperature Compensation
	Thermal Runaway Protection
 Safety Start – charger will not supply current to
	battery until it is properly connected to a battery.
 LEDs – indicate Charging, Charged and Power
 Quick-Disconnect Harness
	 Utilize ring connector and only hook harness up	Model SEM-1562A

once

 No need to remove battery again to charge

 Both the 50-Amp clamp & ring connectors snap into place in seconds

 Reverse-Hookup Protection