Schumacher SP1 owner manual Assembly Instructions, AC Power, Charging, Operating Instructions

10. ASSEMBLY INSTRUCTIONS

Remove all cord wraps and uncoil the cables prior to using the battery charger.

11.CONTROL PANEL LED Indicators

AC POWER	(red) LED lit: Indicates that there is AC power
supplied to the battery charger.
CHARGING	(yellow) LED lit: Indicates the charger has detected

a battery and is charging it.

CHARGING (yellow) LED flashing: Indicates the charger is in abort mode.

CHARGED (green) LED lit: Indicates the battery is fully charged and the charger is in maintain mode.

CHARGED (green) LED flashing: Indicates the battery is 80% charged.

NOTE: See the Operating Instructions section for a complete description of the charger modes.

12.OPERATING INSTRUCTIONS

This battery charger must be properly assembled in accordance with the assembly instructions before it is used.

Charging

1.Ensure that all of the charger components are in place and in good working condition, for example, the plastic boots on the battery clips.

2.Connect the battery following the precautions listed in sections

6and 7.

3.Connect the AC power following the precautions listed in section

8.Make sure to place the charger on a dry, non-flammable surface like metal or concrete.

4.To disconnect, reverse the procedure.

•9•