• 7 •
LEd diSPLAY7.
The LED display identies the current status of the inverter.
VOLTS iN : The voltage of the vehicle’s battery, Portable Power jump starter or
DC power source.
VOLTS OUT : The voltage supplied to the device through the AC receptacle.
WATTAGE OUT : The power or wattage supplied to the device plugged into the
inverter.
An audio alarm will sound when any of the following codes display. To stop the
alarm, press the ON/OFF switch:
• – The inverter is not functional. See warranty and call Customer Service
1-800-621-5485 (Hours: 7:00 am to 5:00 pm CST).
• – The vehicle’s battery voltage is more than 15.5-volts. The inverter will
automatically restart after the voltage drops below 15.0-volts.
• – The continuous load demand from the device exceeds the inverter’s
wattage output.
• – The inverter is overheated and automatically turns off for a period
of 1 to 3 minutes to cool. Make sure the inverter is well ventilated. It will
automatically restart after it cools.
• – The vehicle’s battery voltage is less than 10.5-volts.
• – Short circuit, power surge or overload in the device.
iF THE iNVERTER FUSE BLOWS8.
Your power inverter is tted with a fuse, which should not have to be replaced under
normal operating conditions. A blown fuse is usually caused by reverse polarity or a
short circuit within the device or equipment being operated.
If the fuse does blow, take the inverter to a qualied technician for repair.