9. FEATURES
1 | 2 |
|
|
|
|
| 3 | 1. | AC POWER | (red) LED | |
|
| ||||
|
| 2. | CONNECTED | (red) LED | |
|
|
| |||
|
|
| 4 3. | CHARGING | (yellow) LED |
|
|
| 4. | CHARGED | (green) LED |
|
|
| 5. | Battery Clip Cable Assembly | |
|
|
| 6. | Ring Terminal Cable Assembly | |
|
|
| 5 |
|
|
|
| 6 |
|
|
|
10.ASSEMBLY INSTRUCTIONS
Remove all cord wraps and uncoil the cables prior to using the battery charger.
11.CONTROL PANEL LED Indicators
AC POWER | (red) LED lit: Indicates that there is AC power |
supplied to the battery charger. | |
CONNECTED | (red) LED lit: Indicates that the charger is properly |
connected to the battery. | |
CHARGING | (yellow) LED lit: Indicates the charger has detected |
a battery and is charging it.
CHARGING (yellow) LED flashing: Indicates the charger is in abort mode.
CHARGED (green) LED lit: Indicates the battery is fully charged and the charger is in maintain mode.
NOTE: See the Operating Instructions section for a complete description of the charger modes.
12.OPERATING INSTRUCTIONS
This battery charger must be properly assembled in accordance with the assembly instructions before it is used.
Charging
1.Ensure that all of the charger components are in place and in good working condition, for example, the plastic boots on the battery clips.
• 8 •
