Schwinn 231 manual Install Handlebar

Step 3 Install Handlebar

Parts:

•Seat Frame (Ref. K)

•Handlebar (Ref. J)

•Four M8x16 screws (Ref. I-5)

•Four 8x16x2 Washers (Ref. I-3) Tools:

•Supplied Allen Wrench

3-1Align Handlebar with holes in Seat Frame.

3-2Route the handlebar heart rate wire under the junction box making sure that the wires won’t be pinched. Connect the handlebar heart rate wire to the jack on the Seat Frame junction box labeled “PULSE INPUT”.

3-3Install and completely tighten the hardware.

NOTE: Be careful not to pinch the wires when tightening the

	hardware.
	I-5	J
I-3		K

ASSEMBLY INSTRUCTIONS

9