SOUND AND IMAGE
Poor picture reception
In most cases, simply re-initializing the terminal re-establishes the service. To re-initialize, you need to turn off the
terminal, disconnect it from the wall outlet, and then reconnect it. Wait 5 minutes, restart the terminal and tune in
to a channel. If the problem persists, please contact Technical Support.
What gets connected to the S-VIDEO output and what is it for?
It is used to connect a VCR or TV equipped with an S-VIDEO input. This connector separates colours and brightness,
which enhances image quality. You need to purchase a cable in order to use it.
Can I take advantage of AC-3 technology with the terminal?
Yes, but you need an AC-3 decoder. This decoder is usually built into newer, sound systems or home theatre
systems. The terminal relays the information (Digital Audio Out connector) but does not decode it.
SURVEILLANCE CAMERA
In analog mode, I used to have access to my building's surveillance camera. Is this still possible?
Yes, but you will have to use a splitter in your connection to access the analog signal and tune in to channel 950.
29
29
FREQUENTLY
ASKED QUESTIONS